Re: how to.inspect.motor?
|
I’d still have a crack at fixing the holder, you’ve nothing to lose but a bit of time. ? Bend it back, use 2 pieces of wood to align it with the other one and put a clamp on it.? Then add some epoxy to hold it. ? No harm having a spare motor even if you won’t need it for another 30 years. ? Once it back together you’ll notice a bit of arcing from the brushes; that’s normal as they bed in. ? Tony ? ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Ralph Hulslander via groups.io
Sent: Saturday, 6 July 2024 1:09 AM
To: [email protected]
Subject: Re: [7x12MiniLathe] how to.inspect.motor?? The brush holder is heat deformed. I will check the bearings. ? That brush mount looks trashed, from way too much heat.? Contact Little Machine Shop, maybe they can sell you just the housing.
|
