开云体育

Hi, I am trying to configure a port through yaac to my Kenwood D710 using an RTsytems cable. No matter what setting I choose I cannot communicate with yaac. The RTsystems software works fine, I am

That's what I did too. The digirig would provide PTT for you but again, you would end up connecting that to the PTT of the DATA port and you'd be sacrificing the other half of the radio as unusable.

Hi Danny I have been absorbing all the information that you and others have provided and have decided to emulate your situation and forget the digirig (unfortunately because it was expensive hi

If you want to make your own cables, this is what you need (drawing modified from the manual). The Serial port can go through a DB-9 connector to a USB Serial port DB-9 or you can use a USB to

You can use a GPIO but it is a terrible idea. If you PTT this radio with the PTT input on the DATA port then it will key the radio on whatever side (A or B) is active. If you use a serial port and the

With that particular setup, the DB9 connector had audio ground, Tx audio, Rx audio, and PTT on it (see the TNCPi docs for the pinout). So you need the audio connections to your USB sound card, and the

Hi Danny I already have a homebrew cable with a miniDin on one end and a DB9 on the other. This was from my old tncpi2. In the old setup, the miniDin plugged into the Kenwood radio and the DB9 into

Yes Joe, that will work. Now you need to connect that to the radio body by making the cable or with a Kenwood PG-5H cable kit. Connect the sound card jacks to the USB sound card. The DB-9 data

OK thanks Joe ________________________________ Sent: November 30, 2024 20:26 To: [email protected] <[email protected]> Subject: Re: [yaac-users] YAAC and Direwolf interfacing No, it's a

HI Andrew and Neil With Direwolf running, I can create the yaac ports. I still have to connect to the radio but this is great progress. I have to purchase several audio cables. I can't believe I

Sorry I fat fingered that. I meant to yaac. I’ve got it all working now though.

Use the default-jre package instead. The package names have changed. ________________________________________ Sent: Saturday, November 30, 2024 8:30 PM To: [email protected] Subject: [yaac-users]

Sorry I can’t help you, I have no idea what “yaar” is in relation to a radio or the computer you’re using. Keith, WA0?TJT Author: https://net-control.us ARRL Life Member & VE ARRL ARES

HI Andrew I have a rpi3 running the latest raspi version (bookworm) and I have direwolf also installed.? I tried to install yaac on the same pi and openjdk-8-jre fails to install with unmet

No, it's a standard 6-pin mini-DIN, so there probably several other sources besides Kenwood for such a cable, especially considering you need the appropriate other end for connecting to your sound

Andrew do I absolutely have to buy the connecting cable if I simply want to use the radio to do aprs?? It is quite an expensive option!! Joe

Yes. When you try to open one of those ports, YAAC is trying to connect to the software TNC. If the software TNC is not running, there will be nothing for it to connect to. So Direwolf needs to be

Hi Neil I tried opening a kiss over tcp port following your example but when I tried to create the port, the attempt fails with a java connection refused message. Do I have to hae direwolf running

HI Danny I just purchased this from amazon. Hope it works. https://www.amazon.ca/gp/product/B01N905VOY/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 Joe ________________________________ Sent:

Hi Danny Yes I realize now that the digirig is more than I need! I am going to purchase a "simple" usb sound card. I would appreciate getting your config files if I can to get me started on this.