Re: YAAC and Direwolf interfacing
|
Yes Joe, that will work. Now you need to connect that to the radio body by making the cable or with a Kenwood PG-5H cable kit. Connect the sound card jacks to the USB sound card. The DB-9 data goes into a USB serial port on your computer. my direwolf.conf... ADEVICE plughw:2,0 ARATE 48000 CHANNEL 0 MYCALL K5CG MODEM 1200 PTT /dev/ttyUSB0 RTS TXDELAY 30 TXTAIL 10 AGWPORT 8000 KISSPORT 8001 Your details may be different depending on what port your USB sound card and serial port device names show up as (OS dependent).? 73 Danny, K5CG HH 550-0609 SKCC 14257 From: "Joseph LaFerla" <joe@...> To: "yaac-users" <[email protected]> Sent: Saturday, November 30, 2024 4:12:22 PM Subject: Re: [yaac-users] YAAC and Direwolf interfacing
HI Danny
I just purchased this from amazon.? Hope it works.
Joe
From: [email protected] <[email protected]> on behalf of Danny K5CG via groups.io <k5cg@...>
Sent: November 30, 2024 14:17 To: yaac-users <[email protected]> Subject: Re: [yaac-users] YAAC and Direwolf interfacing ?
Hi Joe,
A digirig would work but it is way more than you need and may not work the way you want (PTT).
I have a TM-V71A running YAAC and direwolf (1.6) on a Pi400 and I use a simple USB sound card connected to the DATA port for audio I/O, and a USB Serial cable to the PC port.
When you put the radio into Echolink mode, it disables the Serial CAT protocol on the PC port but RTS in becomes PTT on the DATA BAND only.
YAAC is connected to direworlf via the AGWPE port.
If you need more details I'll send you my config files.
73
Danny, K5CG HH 550-0609 SKCC 14257 From: "Joseph LaFerla" <joe@...>
To: "yaac-users" <[email protected]> Sent: Saturday, November 30, 2024 12:15:25 PM Subject: [yaac-users] YAAC and Direwolf interfacing HI all
?
I have been running yaac for a long time with a TNC-Pi2 on my rpi3 and a Kenwood TMD710G.? I have recently had to ditch the tnc and have been looking at replacing it with direwolf.? ?I have a working configuration using direwolf 1.7 and a digirig into
my Baofeng handheld.? I want to make this work with my kenwood mobile TMd710G.? I am thinking that most of my current configuration will work. I don't think that my digirig would work.? I have read somewhere that I need to setup an AGWPE port.? ?Can anyone
help please?
?
Thanks in advance
?
Joe VA3TV
|
Danny K5CG