Hi Danny
Yes I realize now that the digirig is more than I need!? I am going to purchase a "simple" usb sound card.? I would appreciate getting your config files if I can to get me started on this.? I look forward?to receiving them.
Joe
VA3TV
toggle quoted message
Show quoted text
Hi Joe,
A digirig would work but it is way more than you need and may not work the way you want (PTT).
I have a TM-V71A running YAAC and direwolf (1.6) on a Pi400 and I use a simple USB sound card connected to the DATA port for audio I/O, and a USB Serial cable to the PC port.
When you put the radio into Echolink mode, it disables the Serial CAT protocol on the PC port but RTS in becomes PTT on the DATA BAND only.
YAAC is connected to direworlf via the AGWPE port.
If you need more details I'll send you my config files.
73
Danny, K5CG
HH 550-0609
SKCC 14257
From: "Joseph LaFerla" <joe@...>
To: "yaac-users" <
[email protected]>
Sent: Saturday, November 30, 2024 12:15:25 PM
Subject: [yaac-users] YAAC and Direwolf interfacing
HI all
?
I have been running yaac for a long time with a TNC-Pi2 on my rpi3 and a Kenwood TMD710G.? I have recently had to ditch the tnc and have been looking at replacing it with direwolf.? ?I have a working configuration using direwolf 1.7 and a digirig into my Baofeng
handheld.? I want to make this work with my kenwood mobile TMd710G.? I am thinking that most of my current configuration will work. I don't think that my digirig would work.? I have read somewhere that I need to setup an AGWPE port.? ?Can anyone help please?
?
Thanks in advance
?
Joe VA3TV
