开云体育

The filters when applied to Station/Object list does seem to give me only the TNC source as I want. However, when the filters are applied, the Last Rcvd column does not sort correctly. Without the

Stay tuned and I'll see what I can do about getting you some support materials. [email protected]> wrote:

That is true. The Heard Stations view doesn't use YAAC's filtering capability. I will look into fixing this. Also, you might find other views (such as the Station/Object list) that might provide the

Andrew, I am a new YAAC user. I found the filter to works well as you describe here as far as viewing Raw Packets. However, when I view Heard Stations, the filter doesn't seem to block the APRS-IS

Well, YAAC is already dual-mode APRS and OpenTRAC, so one more wouldn't be a huge stretch. The issue is the API to the radio/modem. Andrew, KA2DDO author of

Andrew please consider being the first APRS/CATS dual mode software. This looks good! I'll help where I can. https://www.youtube.com/watch?v=pdgPgH-0QPI Ronny K4RJJ

The first picture is of my rig - the Argent board is installed, along with their USB adapter. The DB9 connector and cable are present - as pictured - just not connected. In the Argent Data sample

So where's the Alinco's original DB9 connector and cable? Did you take it out? It should have been connected to the connector on the Argent Tracker board that didn't come with a cable pre-attached to

That picture was my rig. Here's the sample install that Argent Data has on their Web page ...

Andrew, the Arget board is connected to the radio board with a 10 pin connector or similar cable. Does this then connect to the serial port on the back of the radio? Chris -------------------- From:

On 4/18/24 20:08, Andrew P. wrote: > But there should have been another connection on the Argent board for the DB9 to connect to. The no-installed-daughter-board use of the internal cable is to bring

But there should have been another connection on the Argent board for the DB9 to connect to. The no-installed-daughter-board use of the internal cable is to bring the audio and PTT connections to the

The DB9 connector isn't ... connected ... to anything. The internal connection it uses is being used by the Argent Data board.

Well, another alternative is to ignore the USB pigtail coming out of the radio and use the DB9 connector with a USB-to-RS232 adapter instead. If you have the relevant hardware, try that and see if it

It's in digital mode. The radio has the square wave symbol. Also, it doesn't play the audio in digital mode, you just hear clicks on the speaker.

Here's an interesting bit of information I just found in the Argent documentation: The T3-135 board is active only when the radio is placed in digital mode, indicated by a square wave icon on the

Nothing from dmesg. The only thing new is that plugging in the cable from the radio (into the USB 3.0 port on the inovato Quadra), causes the hub to be re-recognized. But only the hub, and the

No /dev/ttyAMA0 device either? Some USB-to-serial chipsets use that device name instead. You might want to execute the "lsusb" command so see if anything is actually on the USB bus. It might be an

Me too. I've been running the Sounds plugin with extra debugging turned on for 3 straight days, and it's still playing the .wav file for me. Andrew,

A couple of more commands to check out: lsusb (or lsusb -l) will list all USB devices. You can do the same before/after to see what appears. dmesg will show the log of kernel messages. Most (if