开云体育

Ok that makes more sense, how would I set the aprs-is filter to do multiple NWS offices, I know my local office is OHX but should I use the airport ID of BNA? I'd like to track the surrounding offices

Did you set that range on your APRS-IS port filter, or on the range exclusion filter? If you're not pulling it in from APRS-IS, it won't be there to be filtered out. Also, you might want to use the

Ok now I have the severe weather zones menu available and opening without the error, but I have no data. I set my filter range to 625 miles. I know there is severe weather in that range of me. What

So the files need to come out of the folder they get unzipped to? Also I believe the names of the files are slightly different, ending in 25 before the extension, does that matter? I will try this

Mike, If you have downloaded and unzipped the NWS files correctly, these 12 files should be in the tiledir (along with any other ones you have separately downloaded for OpenStreetMap or USGS terrain

I am having an issue too, but it is the following message when I select view -> severe weather zones : There are no DBF files containing forecast zone definitions. Download them from

Hello, I need a little help with YAAC. I am trying to get the shape files for NWS alerts installed but every time I try to view severe alerts I get a "There are no DBF files containing forecast zone

I tried both private and local setting during the import. Same behavior for both. 73, de KM4ACK

Are these private Objects, or shared ones being transmitted over RF? Andrew, KA2DDO author of YAAC ________________________________________ Sent: Friday, April 18, 2025 6:00 PM To:

I updated to 9-April-2025 and noticed a few more things concerning imported objects. Imported objects can be clicked again from the main map and comments appear when clicked. The comments do not

Andrew, Direwolf needed an update and some changes to get it to work on an ARM M1 Mac. I also updated the Silicon Labs driver. ?I ran into two problems to get it working. ?First, you need Homebrew

In a terminal window, type: brew --version If that works and returns a current version, then you should be able to install direwolf with: sudo brew install direwolf (caveat here, I use

Carl, I think I have homebrew installed. How would I know? Tim KM4ESU

Hi Tim, It’s worth installing it via MacPorts or Homebrew rather than trying to grab all the dependencies yourself. Since you have xcode installed, MacPorts or Homebrew is simple to

Andrew, Good point this install of Direwolf did not work on an M1 Mac. it was built for an x86. ?Looks like I am back to scratch. Tim KM4ESU

Use the Direwolf author's directions before you jump on some random person's notes (which may be out-of-date, like the APRS webpages that still say to use RELAY and WIDE as digipeat aliases

Andrew, Thinking about this in greater detail I may not need an audio codec. ?I am using a digirig and It has the codec so I am off to install Dierwolf. ?I was following

Hi Tim, Have you tried installing it via Homebrew? 73 de K6EF

"compiler errors" isn't very descriptive. Can you provide the actual text of the error messages? Also, are they really errors, or only warnings? It's impossible to write platform-portable C++ code

Andrew, I did and nothing good to help. I'm having compiler errors and I thought I would ask. Tim KM4ESU