开云体育

Andrew, Before you go through that work, are the packets correct other than the leading symbol? I have been playing around with the different ADS-B receivers and found some play well together and

That's interesting. Your raw packet feed records start with '@', but the ADS-B plugin for YAAC expected them to start with '*' (as the rtl_adsb program produces). I will tweak the ADS-B plugin to

Andrew, Thank you for the quick reply. I see when using PUTTY, via a telnet connection to the PI address and the 30002 port, a stream of stuff, but nothing shows on the YAAC map. Here is a quick

You'd want to connect to port 30002 to get the raw data. YAAC ADS-B decoder plugin processes the raw data itself. Andrew, KA2DDO author of YAAC ________________________________________ Sent:

Has anyone had any luck with using the TCP socket to FLightRadar24? Here are the options from the connection: If I use Putty and telnet to these, there is data there. Just not sure what data it

hi Andrew, thanks for your reply because after i made a submission to yaac-users i thought my posting got lost. i found your software from a youtube video at a conference you did many years ago. what

Greetings. This problem is somewhat unclear., and will require further information to resolve. 1. When you saved your beacon settings, was the "enabled" checkbox checked before you clicked the "Save

the Beacon is not showing on the map. in the Beacon <TAB> i created a new beacon with - X Enabled station beacon Beacon Type: position, manual lat/lon, Display symbol: \# the remaining setting are

It won't be any better with the plugin; they both ignore waypoints right now. ________________________________________ Sent: Thursday, March 20, 2025 11:55 AM To: [email protected] Subject: Re:

I have tried two ways but I think they are the same. 1. I go to file->load->drawing and 2. I have turned on the drawing layer then imported from there. I am guessing that it is the same thing. I

One further question: were you reading the GPX file into a drawing in core YAAC, or as a route in the Dynamic Objects plugin? ________________________________________ Sent: Thursday, March 20, 2025

Greetings. That's an interesting question. At the present time, YAAC only reads the tracks from a GPX file (both for the Drawing layer in core YAAC and for routes in the Dynamic Objects plugin), so

Good Evening, Should Point of Interest in a GPX file show up on the map or just the track section of the file?? I can only seem to get the tracks to show up not the included POI.? Maybe there is a

I think these are the instructions for APRSIS32: http://aprsisce.wikidot.com/en-nws 73, Eric WG3K FM18rpPacket: WG3K@WG3K.#SMD.MD.USA.NOAM E-Mail: wg3k@... Sent from Proton Mail Android

Note that YAAC ("Yet Another APRS Client") is one of the client programs that supports using the NWS weather zones. I can't say if any other client software can use the weather zone definition

Your APRS client. 73, Eric WG3K FM18rp Packet: WG3K@WG3K.#SMD.MD.USA.NOAM E-Mail: wg3k@...

Eric: Thank you for catching this. Anyone using US NWS zone files should pick up the updates and install them. Andrew, KA2DDO author of YAAC ________________________________________ Sent: Monday,

Tomorrow, on 18 March 2025, new National Weather Service (NWS) warning boundaries will go into effect. In order for NWS alerts to continue to be properly displayed on your APRS client (if available),

ok paul tnx

Hello KA1ULN. While i am using various Linux distros, i do not use Direwolf and have no information about that piece of of software. PaulN6MYA