开云体育

Let me add YAAC stops on the wizard at the GPS even if you enter your position. ?

Tim?

Andrew,

I have YAAC running and it looks nice. ?I idid run into a problem with java.io.IOException: no such port. ?

Here is an image of the error it cannot talk to direwolf.?




Tim KM4ESU

Yes, that's the correct Java runtime variant. And you still start YAAC the same way. It's just that it will complain about not being able to load the JSSC library and won't show any serial-port-based port types until you get the upgrade to the build I'm currently working on.

Andrew, KA2DDO
author of YAAC

________________________________________
From: [email protected] <[email protected]> on behalf of Tim Huffaker <thuffaker@...>
Sent: Friday, January 21, 2022 3:54 PM

Andrew,

Kudos for adding this to the new release, I look forward to getting it. One the java runtime all I can find is windows openjdk-aarch64<>. to install. is this the correct software from Get Hub for the Windows 11 ARM 65. Also do I start YAAC from the command promo with java -jar YAAC.jar.

Tim
KM4ESU

Andrew,

Kudos for adding this to the new release, I look forward to getting it. ?One the java runtime all I can find is windows?. to install. ?is this the correct software from Get Hub for the Windows 11 ARM 65. ?Also do I start YAAC from the command promo with java -jar YAAC.jar.

Tim?
KM4ESU

I resolved the issue. It was most certainly user error.

apparently I failed to remove old files and was bogging down the system with too much. So, with help, I got the files cleaned up, and found the pi is so much happier.

I am in the high desert of Oregon. While I live at a mile high, Viewing? a 100 mile track around me,(cause that is closest activity) tends to request a bit from tiles. Elevation changes drastically would be an understatement from desert floor to mountain peaks. Your explanation is mostly what I expected the answer to be and discovered to be true?

Thank you guys for putting up with trivial questions and problems.

And yes, you will still need to install the Java runtime.

________________________________________
From: [email protected] <[email protected]> on behalf of Andrew P. <andrewemt@...>
Sent: Friday, January 21, 2022 12:29 PM
To: [email protected]
Subject: Re: [yaac-users] Windows 11 ARM64 YAAC Install

There is an issue here. The JSSC library needs native machine code for that combination of operating system and CPU hardware. The next build of YAAC is upgrading from JSSC 2.9.2 to 2.9.4, which adds native libraries for Mac OSX on ARM64 and Windows on ARM64, so that should take care of your problem.

Andrew, KA2DDO
author of YAAC

________________________________________
From: [email protected] <[email protected]> on behalf of Tim Huffaker <thuffaker@...>
Sent: Friday, January 21, 2022 11:40 AM

Does anyone know how to get YAAC running on windows 11 ARM64. I do think I need to install Java but from what I am seeing I am not sure. if you need to install Java please point me to where to get it. If you do not I think I need to involve YAAC from the command prompt can you confirm that or how to get it working.

Thank you for your help Windows 11 ARM64 has some interesting challenges.
Tim
KM4ESU

There is an issue here. The JSSC library needs native machine code for that combination of operating system and CPU hardware. The next build of YAAC is upgrading from JSSC 2.9.2 to 2.9.4, which adds native libraries for Mac OSX on ARM64 and Windows on ARM64, so that should take care of your problem.

Andrew, KA2DDO
author of YAAC

________________________________________
From: [email protected] <[email protected]> on behalf of Tim Huffaker <thuffaker@...>
Sent: Friday, January 21, 2022 11:40 AM

Does anyone know how to get YAAC running on windows 11 ARM64. I do think I need to install Java but from what I am seeing I am not sure. if you need to install Java please point me to where to get it. If you do not I think I need to involve YAAC from the command prompt can you confirm that or how to get it working.

Thank you for your help Windows 11 ARM64 has some interesting challenges.
Tim
KM4ESU

Does anyone know how to get YAAC running on windows 11 ARM64. I do think I need to install Java but from what I am seeing I am not sure. ?if you need to install Java please point me to where to get it. ?If you do not I think I need to involve YAAC from the command prompt can you confirm that or how to get it working. ?

Thank you for your help Windows 11 ARM64 has some interesting challenges.?
Tim?
KM4ESU

Did you purge the tiles? Did you tell YAAC not to purge them?

-----------------------------------------

From: "Andrew P."
To: "[email protected]"
Cc:
Sent: Thursday January 20 2022 9:21:07PM
Subject: Re: [yaac-users] Where did my map tiles go??

Unfortunately, computing topographic curves from rasterized elevation data is horribly expensive mathematically, and YAAC always does that on-the-fly based on the current zoom level and map center (rather than sucking up disk space saving rendered tiles for a particular tile and zoom). Not knowing how uneven the terrain is in your vicinity, all I can suggest is to adjust the topographic line spacing to be further apart, so fewer curves have to be computed. You will find it more efficient to use topographic regions, where the map background is colored based on the elevation at each pixel (which therefore doesn't have to figure out which way a topographic line is bending in each pixel).

Andrew, KA2DDO
author of YAAC

________________________________________
From: [email protected] <[email protected]> on behalf of Chris Robinson KF6NFW DMR ID 3153250 <kf6nfw@...>
Sent: Thursday, January 20, 2022 8:47 PM

Okay, i still have no idea how I managed to trash my tiles. I did manage to download them and gain some normalcy.

My newest issue is either just me as the user having an issue or possibly the pi, I dont know. anyways it seems to tak a considerable amount of time (more then 30 minutes) to get the topo layers lines and colors to show.

I am using a pi 4 4GB RAM with Bullseye, and for the most part nothing ls operational on here yet. I was in procss of settingn up things whn I encountered this.

Unfortunately, computing topographic curves from rasterized elevation data is horribly expensive mathematically, and YAAC always does that on-the-fly based on the current zoom level and map center (rather than sucking up disk space saving rendered tiles for a particular tile and zoom). Not knowing how uneven the terrain is in your vicinity, all I can suggest is to adjust the topographic line spacing to be further apart, so fewer curves have to be computed. You will find it more efficient to use topographic regions, where the map background is colored based on the elevation at each pixel (which therefore doesn't have to figure out which way a topographic line is bending in each pixel).

Andrew, KA2DDO
author of YAAC

________________________________________
From: [email protected] <[email protected]> on behalf of Chris Robinson KF6NFW DMR ID 3153250 <kf6nfw@...>
Sent: Thursday, January 20, 2022 8:47 PM

Okay, i still have no idea how I managed to trash my tiles. I did manage to download them and gain some normalcy.

My newest issue is either just me as the user having an issue or possibly the pi, I dont know. anyways it seems to tak a considerable amount of time (more then 30 minutes) to get the topo layers lines and colors to show.

I am using a pi 4 4GB RAM with Bullseye, and for the most part nothing ls operational on here yet. I was in procss of settingn up things whn I encountered this.

Okay, i still have no idea how I managed to trash my tiles. I did manage to download them and gain some normalcy.

My newest issue is either just me as the user having an issue or possibly the pi, I dont know. anyways it seems to tak a considerable amount of time (more then 30 minutes) to get the topo layers lines and colors to show.

?

I am using a pi 4 4GB RAM with Bullseye, and for the most part nothing ls operational on here yet. I was in procss of settingn up things whn I encountered this.

I did not chang a directory. I did an update from build 165 to 168, played around with trying to download tiles from OSM, and from then on, I lost what I had.?

As for purging them, I suspect that is possible though I sure dont recall giving commands to remove anything, and I should. my pi is a bit bloated with crap right now!

Like I said I am still learning my way through some things. I can build a pi and understand the HW components, SW screws me over every time! Even with written directions, I have had to ask for help from a friend to ssh into my pi on many occasions to fix my screw-ups.

?I am of the inclination to dump it and start fresh, however also in the spirit of trying to learn, i am trying to figure out what I did and recover it first if possible.

Thank you for your help guys.

?Andrew, i do read most of what you post, though I understand only the words!

?

I'm not sure how your map tile files get trashed. Did you change the location of your tile directory?

In any case, you can always re-download the current map tiles from my website. Go to File->OpenStreetMap->Download Pre-Imported Tiles. Assuming your computer has Internet connectivity, the tiles for the area you request can quickly be downloaded.

Hope this helps.

Andrew, KA2DDO
author of YAAC

________________________________________
From: [email protected] <[email protected]> on behalf of Chris Robinson KF6NFW DMR ID 3153250 <kf6nfw@...>
Sent: Wednesday, January 19, 2022 12:39 PM
To: [email protected]
Subject: [yaac-users] Where did my map tiles go??

I am using build 168. All my tiles had been there, the map was working fine no issues. Me still learning my way around FUBARed something, and now I have only 9 tiles with me in the center. I can see the trace to many other stations, but no way to see where they are on a map, just empty squares.

Would someone be kind enough to educate this idiot how to recover them?

Did you purge the tiles?

-----------------------------------------

From: "Chris Robinson KF6NFW DMR ID 3153250"
To: [email protected]
Cc:
Sent: Wednesday January 19 2022 12:42:37PM
Subject: [yaac-users] Where did my map tiles go??

I am using build 168. All my tiles had been there, the map was working fine no issues. Me still learning my way around FUBARed something, and now I have only 9 tiles with me in the center. I can see the trace to many other stations, but no way to see where they are on a map, just empty squares.

Would someone be kind enough to educate this idiot how to recover them??

I am using build 168. All my tiles had been there, the map was working fine no issues. Me still learning my way around FUBARed something, and now I have only 9 tiles with me in the center. I can see the trace to many other stations, but no way to see where they are on a map, just empty squares.

Would someone be kind enough to educate this idiot how to recover them??

Ok, I figured out this one too.? It turns out I did not set a Display symbol in the Beacon.? Once I did that it works.? Thanks again everyone for your help.

Chris W6COV

Thanks for all the help.? I ended up re-installing Java and now it transmits!

But, I see this issue when I look at my packets on aprs.fi:

2022-01-16 21:32:40 PST:?>APJYC1,WIDE1-1,WIDE2-1,qAO,::SMSGTE???:@6502820215?Test{m0001
2022-01-16 21:33:09 PST:?>APJYC1,WIDE1-1,WIDE2-1,qAR,:=/;Y)@/[M4???#,/W2?[Invalid compressed packet]
2022-01-16 21:35:09 PST:?>APJYC1,qAR,:=/;Y)@/[M4???#,/W2?[Invalid compressed packet]
2022-01-16 21:36:01 PST:?>APJYC1,WIDE1-1,qAR,:=/;Y)@/[M4???#,/W2?[Invalid compressed packet]

My message to SMSGTE works fine but the beacons seem to have a formatting issue.? I must have something set wrong.? Any ideas?

Chris W6COV

The Kenwood D710 is a TNC2-compatible, so just pick that pre-programmed setting,

When you configured the Serial_TNC port, did you enable transmits and specify your callsign?

Andrew, KA2DDO
author of YAAC

________________________________________
From: [email protected] <[email protected]> on behalf of Chris Hansen <hansencj@...>
Sent: Sunday, January 16, 2022 10:10 PM
To: [email protected]
Subject: Re: [yaac-users] Yacc won't transmit with Kenwood TM-D710

Thanks. I didn't have any trouble connecting to the radio with PuTTY. I am using the Serial_TNC mode in YACC. The radio is set to "PACKET12". I understand the Kenwood has a limited buffer size but it should be able to send something. Sometimes it works for receive, but it never works for transmit. What setting should I put in for "Command to enter KISS mode"?

Chris W6COV

Thanks.? I didn't have any trouble connecting to the radio with PuTTY.? I am using the Serial_TNC mode in YACC.? The radio is set to "PACKET12".? I understand the Kenwood has a limited buffer size but it should be able to send something.? Sometimes it works for receive, but it never works for transmit.? What setting should I put in for "Command to enter KISS mode"?

Chris W6COV

As we are aware, the TM-D710A has packet/APRS modem built in the head unit, but the chipset used for it has a limited payload so you end up breaking messages into smaller chunks.

I would recommend using the TM-D710A (and the TM-V71A - same radio body) in the traditional packet setup. Connect a soundcard to the Data jack and a serial port to the PC jack. Set the data band to A or B (Preference) and then turn on EchoLink Sysop mode. Then when you assert RTS on the serial port it will key the transmitter of the selected Data Band. For APRS you'll need a TNC like direwolf to encode and decode the modem tones.

The beauty of this setup is you all ready to use the same radio for other modes like FSQ, MultiFSK, SSTV, etc., with fldigi etc.

Danny
K5CG