开云体育

ttyACM1 is the cat control + PTT and ttyACM0 is for using minicom to login to the x6100. I used to use flrig and point all my digital apps to use flrig. But lately flrig hasn't been working too well

I still have no clue what to do with the Bluetooth capability. I use a Bluetooth adapter plugged into the audio jack so I can use an external Bluetooth speaker.?【Upgraded】 Aux Bluetooth 5.0...

If using Linux, the com ports pop up as ACM0 and ACM1, and it always seems to be the highest number ACM.? On split operation, I use fake it instead of none. You can just go with default on all three

Hi Oleg, Yes it is a shame that FM is not good, I did have a g90 and when they added FM to it, RX was ok, but FM tx audio was not great, With the 6100 tx audio is better than the Rx audio, Good

Yes, it has arrived. I only tested it for reception, I did not try it for transmission. I plan to do this one of these days. Now I'm stubbornly trying to overcome the problem of loss of sound

Go with the radio as is until you’ve had time to become well acquainted with it. The Xiegu factory GUI is very good. For the most part you will find it to be a very nice radio and a good value.

I use my X6100 for POTA exclusively. I run SSB with a 3ah Bioenno battery which gives my 10w. My antenna of choice is the 50w Sparkplug EFHW in a Sloper configuration. I get into Europe pretty

My first 6100 went back for s battery issue. The second worked a little better, but I would not call it stable for any mode of operation. I tried?R1CBU's firmware and love it. Easier to use, all the

If you run on battery max output is 5w, if you use a powerbank you can get up to max 10w I use a vertical on a mag-mount for mobile from the car like this SPX-300S 9 Band Plug N Go HF Mobile Antenna

Hi Oleg, Thanks for the info I will try a smaller card, Has your Transverter arrived yet ? Thanks Dave

I just picked up an x6100 for Christmas during the Black Friday sales. I plan to use this for portable ops in a park and when camping with my RV for both Digital and SSB operations. It appears to

Thanks Michael! These settings got my 6100 working on FT8. Updated the firmware to the latest and installed the usb driver and started fighting with it hihi. Making contacts under rig control

Yes, the size of the SD card is limited only by the size of the image. Now the image is 1GB, so you can orientation on it size as minimal.

Hi Oleg can you please tell me if running your firmware on a smaller SD card will make it run any better as i am using a 128Gb card and it is running fine Thanks Dave 2E0DMB

That's good. Mine used to do that. Then it stopped after I went through the 4 discharge cycles

Hi John I am getting white, to yellow, to red as my battery's run downwith the latest firmware Dave 2E0DMB

Thanks. So once I tune an antenna on all bands, I don't have to retune?

Tuner parameters are saved in a settings file.

I use the GPS dongle and it works well with the R1CBU version 0.19.0 to set time and location. The only problem, which is not a problem for me, is the presence of the USB device disables the screen

While I’m not saying that I won’t buy the new model, it’s sort of a suckers bet for those of us that do. We’ve all seen what Xiegu is all about and we have no reason to trust them at this