开云体育

Though the X6100 comes with an “anti-tamper” sticker on its cabinet to detect “unauthorized/warranty-voiding” behavior, I do believe that it is and has been illegal in the United States for

Yes, that is my understanding. ?If you break the tape seals, you have invalidated your warranty. ?However, if you bought your X6100 from Radioddity, I would contact Radioddity about any issues you

If you open the case to replace the batteries have you invalidated the warranty (Radioddity)?

Hi Ron, The X6100 has a couple of bad ideas in the design, not the least of which is having a too small battery to do any real good. But my main gripe with it is their use of two processors. It's fun

I am sure as most know anything from China will have problems for repairs and service.? Like the UV5R for which so many Hams have, it is a throw away rig when it dies.? I had one die and for fun

https://www.amazon.com/gp/product/B08TTTBTSR/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1

i'm not crazy about the CW message memory interface, but that's easily overcome with external pico keyer. as far as rest of the #RICBU FW, i really like the variable filter capabilities and will most

Like a previous poster I've lost any faith I had in Xiegu because of this radio. I too have charging issues. After a full charge cycle the radio will only receive for about thirty minutes before the

I do know that the G90 received an update a year or two after its introduction due a need to change one of the microprocessors used. This also caused a need for a minor change in the firmware from

To some extent, it is. Because on my "feature request" Oleg introduced the "Shadow Charging" option and that must communicate with the battery charging as I understand it. Stay safe and 73 de SA5QED

Their way of product improvement seems to be a new model Such as the X6200 (due in the next 3-6 months as ham shops are taking deposits) Main improvement is a detachable battery pack from the specs

IMHO, I think they made production line changes with part quality. I bought my x6100 Oct. of 2024. No problems with the battery or charging. I always remember to turn off charging when running

Mark, I haven't changed the suspected bad part in mine yet but when I do I'll contact you with the results. 73 Frank AA5IT

Just so you know,,,, Mine won't charge either. The battery charger circuit is broken. I suspect it's the FET that the controller switches but I haven't taken the time to troubleshoot it yet. I've lost

Michael, Same thing just happened here and i'm using V.19 firmware and same xiegu FW. Issue resolved when i disconnected external power, removed the sd card completely, waited a few minutes and tried

Is the battery-management logic under the control of firmware? I.e., if I load and use Oleg's firmware, should I expect different charging behavior from default Xiegu? Lou KC1PKD

Mark, WA0ZIG ?I suggest you need to determine if the charging circuit is working.? You need to use an external 12V source with a current meter between this source and the X6100.? I see about 750ma

Does Xiegu produce radios in batches? If so, do newer batches include any physical improvements like better heat sinking and an improved battery charging system? Maybe it's just one run and done.

I think you misunderstanding.. The user interface is at 1.1.7 can be used with the baseband firmware of 1.1.6 and 99% of things work. There are 2 sides to a firmware update, the User interface and the

Dear group members, have found an issue concerning the first symbol sent at the beginning of cw transmit. Getting an pwr overshoot independent of configured pwr 0.1 - 5W in bat. mode and the same