Dear group members,
have found an issue concerning the first symbol sent at the beginning of cw transmit.
Getting an pwr overshoot independent of configured pwr 0.1 - 5W in bat. mode and
the same with external pwr 0.1 - 10W.
See attached pics.
A second observed issue occurred during changing mode from cw to ssb and back
to cw. After such mode change every time the first symbol get a bad shape.
See second part of pics.
Could you please check and verify my observation.
Used an 30dB att and a SDS1104 DSO with 50 ohm termination!
The FW Version of the X6100 is listed below.
many thanks for your effort
Markus
PS.: Please take into consideration, that the provided links at pixshare
are only valid for the next three months from today (20th Feb. 2024)
