开云体育

hello yes, you are right, the previous version also had this issue.

Hmm. No one of the previous versions of the R1CBU firmware wasn't work correctly on your radio, am I right? It might be, that some process on the OS creates heavy CPU workload. Could you connect to

Well this normal in development and production of electronical devices, as there will be Alain and again electronical Parts out of sale. In the best you will get a comparable Part, you can use with

Especially about that : I have decided now to order and buy now a second new one of X6100 . Then I can better compare ... also measurements. Jens Sent: Tuesday, September 24, 2024 7:50 AM To:

I never saw this before like in the video . I think that the hardware differences (or faulth`s) of all the existing X6100`s are very big . So , it will complete difficult in all future – by all

The date of the 1.1.9 should be 9/15/2024.? 1.8 has date of 09/04/2024. 73, ron, n9ee/r Ron Wright, N9EE/RHernando Co ARES EC Spring Hill, Florida also n9ee55@...

I tried Raddity for the 1.1.9 upgrade, but seems they have only 1.1.8.? I got the .9 at Xiegu site. Took about 5 minutes to download. 73, ron, n9ee/r Ron Wright, N9EE/RHernando Co ARES EC Spring

Steve, I believe that you may have touched on the underlying issue that has yielded "good" vs "bad" installations of the 1.1.18 version of firmware. This has been puzzling as to why some would update

In 1.1.9 the CW sig in the audio scope is where it should be, 750 Hz. I installed 1.1.9 and all is working fine. I do prefer the new white colors since they will be easier to see when operating

Issue is still there.

Could you try to copy 3 files from attached archive to BOOT partition of the SD card? It's a kernel and device tree from Oleg's 0.20.0 image

Thanks for swift reply. Base firmware 1.1.8 but it also happened with the previous one 1.1.7 I believe. Here is a link to video. https://youtu.be/1l3otTlX1Ew All the best. Edit: original firmware has

Well, if you unsatisfied with BASE 1.1.7 or 1.1.8 and using 1.1.6 - you might use patched 1.1.6 If you have no TX issues with BASE 1.1.7 - you might use patched 1.1.7 I'm going to patch and share BASE

Hi. Do you mean general waterfall or waterfall on the FT8 app? Freezing affects only waterfall, or waterfall and spectrum? Is waterfall and spectrum on original FW behaves correctly? What is your BASE

As far as I know - with the 1.1.6 BASE firmware RFGain should be 63 to show correct S values. For 1.1.7 - RFGain should be close to 100. I have no equipment to check correctness of these values. I

What do you mean by jumper? If it's coax then it's the same for both

Hello and thanks for picking up this project. I have always had issues with this firmware and thought your version would fix most problematic thing in the first place which is freezing waterfall.

I experienced the same thing with my mic. NO direct entry whatsoever. I was trying things out just using internal battery. While the unit was on, I plugged in my external battery and the direct entry

Do you use the same jumper between the radios and the antenna? I had an swr issue come up because the patch cable was bad for one of the radios.

Some see changes with 1.1.9 some don't. Consider in process manufacturing changes. Different parts suppliers could even change tolerances. Even in ideal manufacturing conditions you can pull 2 of