CW Receive but no transmit
Hi I can receive CW in Fldigi, but can not transmit.? I have tested using another radio, and while FLdigi does transmit, there is no audio, just a carrier.
?
I've checked my settings and have the correct sound card selected.
?
To make matters harder, I can transmit and receive on Olivia.
?
Any help appreciated!
|
Avec plaisir.? merci a vous? ? 73??
?
De : "Dave MARS Maples via groups.io"
A : [email protected]
Envoy¨¦: samedi 23 Novembre 2024 14:02
Objet : Re: [winfldigi] FLDIGI arret
?
Tout : Le message d¡¯Olirobin se traduit comme suit :
Je ne crois pas que ce soit normal. Quelqu¡¯un d¡¯autre peut-il intervenir ici ? Je me ferai un plaisir de traduire en fran?ais.
Olirobin : Je ne crois pas que ce soit normal. J¡¯ai traduit votre message en anglais et demand¨¦ de l¡¯aide ¨¤ d¡¯autres. Je suis s?r que des gens plus intelligents seront en mesure de vous aider.
Dave WB4FUR
Olirobin : Je ne pense pas que ce soit normal. J'ai traduit votre message en anglais et demand¨¦ de l'aide ¨¤ d'autres personnes. Je suis s?r que des personnes plus intelligentes pourront vous aider.
Dave WB4FUR
?
-----Message original -----De : [email protected] <[email protected]>
Au nom d¡¯olirobin via groups.io
Envoy¨¦ : vendredi 22 novembre 2024
12:54 ? : [email protected]
Sujet : [winfldigi] FLDIGI arret
?j¡¯utilise le logiciel FLDIGI?? qui ai tr¨¨s bon?? depuis un temps? sous win 10 64 bits ,? pour d¨¦coder des images fax? en HF? et? le logiciel au bout de deux heures il s'arr¨ºte?? compl¨¨tement?? !?? es-que ces normale ?????? dans la version gratuite??? merci pour? des infos sur ce sujet 73 a tous???
?
|
All: Olirobin's message is translated as follows:
I don't believe that's normal.? Can someone else weigh in here?? I will be happy to translate back to French.
Olirobin: I don't believe that is normal.? I have translated your message into English and asked others for assistance.? I am sure smarter people will be able to help you.
Dave WB4FUR
Olirobin : Je ne pense pas que ce soit normal. J'ai traduit votre message en anglais et demand¨¦ de l'aide ¨¤ d'autres personnes. Je suis s?r que des personnes plus intelligentes pourront vous aider.
Dave WB4FUR
toggle quoted message
Show quoted text
-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of olirobin via groups.io
Sent: Friday, November 22, 2024 12:54
To: [email protected]
Subject: [winfldigi] FLDIGI arret
?j¡¯utilise le logiciel FLDIGI?? qui ai tr¨¨s bon?? depuis un temps? sous win 10 64 bits ,? pour d¨¦coder des images fax? en HF? et? le logiciel au bout de deux heures il s'arr¨ºte?? compl¨¨tement?? !?? es-que ces normale ?????? dans la version gratuite??? merci pour? des infos sur ce sujet 73 a tous???
|
Bonjour Olirobin,
Non, ce n'est pas du tout normal ou m¨ºme pr¨¦vu. Je l'ai aussi utilis¨¦ pas mal pour des images FAX (Windows 7 et Windiws 10) et je n'ai pas du tout eu un tel probl¨¨me. FLdigi est gratuit sans aucune option ¨¤ payer...
Pendant les 2 heures, les images sont bien re?ues et enr¨¦gistr¨¦es? Et ensuite, ?a se plante sans r¨¦agir? Toujours 2 heures avant le probl¨¨me arrive?
Vous avez bien activ¨¦ APT et Cont. pour le mode automatique?
³§¾±²Ô³¦¨¨°ù±ð³¾±ð²Ô³Ù,
Tobias
.-.-. Am Freitag, 22. November 2024 um 21:23:24 MEZ hat olirobin via groups.io <olirobin@...> Folgendes geschrieben:
?j¡¯utilise le logiciel FLDIGI? ?qui ai tr¨¨s bon? ?depuis un temps? sous win 10 64 bits ,? pour d¨¦coder des images fax? en HF? et? le logiciel au bout de deux heures il s'arr¨ºte? ?compl¨¨tement? ?!? ?es-que ces normale ?? ? ? dans la version gratuite? ? merci pour? des infos sur ce sujet 73 a tous? ??
|
?j¡¯utilise le logiciel FLDIGI? ?qui ai tr¨¨s bon? ?depuis un temps? sous win 10 64 bits ,? pour d¨¦coder des images fax? en HF? et? le logiciel au bout de deux heures il s'arr¨ºte? ?compl¨¨tement? ?!? ?es-que ces normale ?? ? ? dans la version gratuite? ? merci pour? des infos sur ce sujet 73 a tous? ??
|
Re: Installing CHIRP on a windows PC
That is what I sent, was a link to CHiRP Next. I didnt send the daily build?link though, I dont believe it. Once installed however, it will do a self check and request the update anyways.
Sincerely, ?Mr. Chris A. Robinson? ?KF6NFW / WQOQ661
There is a chirp next version now:
73
|
Re: Installing CHIRP on a windows PC
There is a chirp next version now:
73
|
Re: Signalink audio level changes with frequency
On Wed, Nov 20, 2024 at 09:54 PM, Tom Schmidt wrote:
I'll operate, say, PSK31 on my Yaesu FT-920 at the lower end of the passband at a set audio level. Then, when I change to the higher end of the passband, my audio level will be too high, forcing me to lower it so as not to splatter.
Hey Tom,
?
For many years I was using the "headphones-to-microphone" method to get audio from my PC into my rig. It was noisy, but it worked. But I did notice the same behavior that you are seeing -- if I adjust the audio output levels for 1500 Hz on the waterfall, but then transmit at the lower or higher ends of the waterfall, then levels would be too low or too high.
?
The easiest way around this is to use the QSY button in Fldigi, which will adjust your VFO to keep your transmit audio signal at 1500 Hz (or whatever you have defined as the Sweet Spot in the Fldigi config). I even defined a macro in Fldigi that does the QSY and then LOCKs the transmit audio frequency, like this:
?
<QSYTO><LOCK:on>
?
I've recently switched to using a cheap audio isolation transformer that I picked up from ebay, which allows me to route the audio out from the PC directly into the microphone jack of the rig, and I no longer have the variation of audio levels when I select a different waterfall frequency in Fldigi. Or at least not that I can notice. :)
?
Cheers,
Steve K4RVA
|
Anomaly with FLDigi and N3fjp ARRL RTTY ROUNDUP
While working with a friend to get him setup on FLDigi and n3fjp for the upcoming ARRL rtty roundup in Jan 2025, we were sending each other some practice QSOs. When I sent him my exchange with TN as my state, my friend clicked on it and FLDigi entered 09 in the serial number field rather than TN in the S/P field.?
?
We tried all states and the only problem was with TN. We also tested other n3fjp contest logs and had no problems with TN being properly recognized.?
Any comments or suggestions?
|
fldigi 4.2.06.09 posted at
Latest changes:
commit
61d36174e96cb6c5c2d118521036b316b05fdbb2
Author: dave-w1hkj <w1hkj@...>
Date:?? Thu Nov 21 07:55:00 2024 -0500
??? alpha
commit 5b70d60ea16937ab77ed37c9deed8cbf47d6949f
Author: dave-w1hkj <w1hkj@...>
Date:?? Wed Nov 20 11:04:17 2024 -0600
??? band mode
?? ?
????? * fix save/load of tx level
commit 920a1af0c717edce79bbb4a0a3597caaaf11f674
Author: dave-w1hkj <w1hkj@...>
Date:?? Wed Nov 20 07:16:15 2024 -0600
??? fmt time scale
?? ?
????? * add 4, 8, 16, 24 and 48 hour scales
commit ff91d937903ce30cc825d30b6470cc37c5f6f9e4
Author: Daniel Marks <profdc9@...>
Date:?? Tue Nov 12 08:34:18 2024 -0600
??? scamp
?? ?
????? * port SCAMP from github fldigi/scamp repository
73, David, W1HKJ
|
Re: Signalink audio level changes with frequency
My mistake.? No I don't think it does. So dialing up so audio is do.ewhat centre of audio band is best
sent by ve3wej on samsung s21+
Does FLDigi have 'fake it'
73
vk4tux
On 21/11/24 15:31, Dave Garber via
wrote:
check to
see if fake it is turned on
Dave Garber
VE3WEJ / VE3IE
|
Re: Signalink audio level changes with frequency
I am not familiar with this HF SSB Yaesu rig but check this way.
?
Do a FLDIGI TUNE (that¡¯s a steady sine wave) on 500 Hz, then 1000 Hz, then 1500 Hz and stop at 2000 Hz, and report to us the power output at these audio frequencies. ?I would never go below 500 Hz nor above 2000 Hz. What power level are you aiming for?
Is the ALC zero at the power level you are running?
?
I would tend to keep the average power output on all digital modes (especially RTTY) at 50W or less with zero ALC ?reading on the radio¡¯s dial. Remember psk modes will show an average power well below the peak power (BPSK31, VARA, etc.)
?
Your radio is likely in a USB-DATA mode, not USB (PHONE) so the MIC is not live.
The COMPressor should be disabled on all data modes.
?
What is the radio¡¯s TX bandwidth setting?
Personally I like to always center close to 1500 Hz audio with a ?1000 Hz bandwidth.
But this is for my ears, not for the sound card input.
?
I¡¯ll bet your radio¡¯s TX bandwidth is set to a very narrow level (if the radio has that option).
?
de k3eui barry
?
?
|
Re: Minimum required SNR for different THOR modes
I am the net manager of two NBEMS nets, one on 80m (PaNBEMS) and one on 40m (MidAtlantic NBEMS).
Both nets meet Sunday mornings: PA at 7:30 AM Eastern and MidAtl at 10 AM
Conditions are usually stable on 80m up to 9 AM when the D layer kills RF.
Conditions are variable on 40m at 10AM based on the solar cycle.
We are only interested in EMCOMM over the mid-Atlantic region, not DX
?
?
For preamble and taking checkins, we use THOR22 (500 Hz BW and 80 wpm) at 22 tones/second (baud).
If conditions are marginal with QSB, sometimes a signal fades and we get no print, so we ask all stations to check in with their call TWICE, then name, QTH and traffic/no traffic ¡. ?and we ask for checkins to report the net control¡¯s S/N as reported in their FLdigi waterfall (lower left). ?That gives the net control a quick sense of propagation.
Both nets take over 30 checkins and sometimes up to 60 checkins, from PA/MD/DE and NY/NY and most of New England and as far south as VA and NC.
?
?
As I watch and listen, often the print gets somewhat garbled at about -10dB with THOR22.
So when I am net control, I consider switching to THOR11 (a gain of 3 dB and still about 40 wpm).
?
?
When we switch to traffic mode, we often move to THOR32 or MFSK32.
I know these both need a decent S/N or we get gaps in a FLMSG (bad file) or missing blocks (FLAMP)
?
If we try THOR56, we often get many reports of missing blocks, so don¡¯t try Thor56 now.
?
Because of QSB, the signal may vary on my S meter (radio) by TWO S-units, or about ?10dB.
So the trick is not to estimate the avergage copy S/N but rather to consider who will miss data during the dip in signal.
?
Dave W1HKJ has charts that show the expected S/N levels but my experience on morning nets is that if the S/N of MY Fldigi is -5dB to +5 dB that I will likely copy 100%. ?When the signal drops to -10dB (average) I know I will miss a bit of data, which is frustrating since then RESENDS are required, which slows down the net.
?
Does that help?
?
A casual chat with THOR is very different from an EMCOMM net using THOR where we want copy of traffic with NO errors.
?
Dave - where are you located and what is your FCC call?
We can run some tests if we have prop between our stations.
?
de k3eui Barry
Pa and MA NBEMS nets from eastern PA
?
?
?
|
Re: Signalink audio level changes with frequency
Does FLDigi have 'fake it'
73
vk4tux
On 21/11/24 15:31, Dave Garber via
groups.io wrote:
toggle quoted message
Show quoted text
check to
see if fake it is turned on
Dave Garber
VE3WEJ / VE3IE
|
Re: Signalink audio level changes with frequency
True, This is some of the reason wsjtx uses rig split or fake it.
If you want to keep audio constant vary the vfo rather than the
program pan point (audio freq).
73
vk4tux
On 21/11/24 15:17, Mike Olbrisch via
groups.io wrote:
toggle quoted message
Show quoted text
It sounds to me like your radio audio
circuits do not have a flat response.? For best function, the
radio should reproduce audio levels equally across the
spectrum, not suppress or enhance different parts of the audio
passband at different levels.? That is something that would be
good for voice ¨C NOT for digital.
If your radio has a microphone equalizer,
you may want to zero it out.? My ICOPM has a separate input
for digitan that has a flat passband.
Best of luck!
?
Vy73 - Mike - KD5KC.
El Paso, Texas - DM61rt.
SOTA W5T-Texas Association Manager.
?
?
?
?
?
?
Hi there. When I operate digital modes in
FLDigi using my Signalink USB, why does the audio level
change when frequency is changed? I'll operate, say, PSK31
on my Yaesu FT-920 at the lower end of the passband at a set
audio level. Then, when I change to the higher end of the
passband, my audio level will be too high, forcing me to
lower it so as not to splatter. When I change back to the
lower end of the passband and transmit, my audio level is in
the mud, forcing me to turn the audio up. Why is that?
|
Re: Flrig Mac Intel and IC7300
#flrig
depending on the mac version, you may need to use the older version.? not sure, but here? Dave Garber VE3WEJ / VE3IE
am i trying to get help from the wrong group???
intel Mac Mini wont dl flrig
I didn't see an alternative to blithely, etc etc.
the meters show up but initializing locks up with the rainbow wheel.
|
Re: Signalink audio level changes with frequency
check to see if fake it is turned on
Dave Garber VE3WEJ / VE3IE
On Thu, Nov 21, 2024 at 12:17?AM Mike Olbrisch via <mike-2025= [email protected]> wrote: It sounds to me like your radio audio circuits do not have a flat response.? For best function, the radio should reproduce audio levels equally across the spectrum, not suppress or enhance different parts of the audio passband at different levels.? That is something that would be good for voice ¨C NOT for digital.
If your radio has a microphone equalizer, you may want to zero it out.? My ICOPM has a separate input for digitan that has a flat passband.
Best of luck!
? Vy73 - Mike - KD5KC. El Paso, Texas - DM61rt. SOTA W5T-Texas Association Manager. ? ? ? ? ? ? Hi there. When I operate digital modes in FLDigi using my Signalink USB, why does the audio level change when frequency is changed? I'll operate, say, PSK31 on my Yaesu FT-920 at the lower end of the passband at a set audio level. Then, when I change to the higher end of the passband, my audio level will be too high, forcing me to lower it so as not to splatter. When I change back to the lower end of the passband and transmit, my audio level is in the mud, forcing me to turn the audio up. Why is that?
|
Re: Signalink audio level changes with frequency
U-10 ( ) Function: Selection of Enhanced Tuning Scale choices Available Values: / ! / " / #? Default: ! The Enhanced Tuning Scale, located immediately above the VFO-A frequency display, may be used to provide a visual indication of several transceiver operating characteristics: When the Clarifier is active, a small dot below the horizontal Enhanced Tuning Scale shows the relative offset of the Clarifier from the displayed VFO-A frequency. Note that this small dot will be observed on Receive when the RX Clarifier is on, but only on transmit when the TX Clarifier is on. ! When the DSP is On, this scale provides a relative indication of the bandwidth currently set via the High-Cut and Low-Cut knobs.
On Wednesday, November 20, 2024 at 10:54:26 PM CST, Tom Schmidt via groups.io <tschmidt6060@...> wrote:
Hi there. When I operate digital modes in FLDigi using my Signalink USB, why does the audio level change when frequency is changed? I'll operate, say, PSK31 on my Yaesu FT-920 at the lower end of the passband at a set audio level. Then, when I change to the higher end of the passband, my audio level will be too high, forcing me to lower it so as not to splatter. When I change back to the lower end of the passband and transmit, my audio level is in the mud, forcing me to turn the audio up. Why is that?
?
Tom, N8EUI
|
Re: Signalink audio level changes with frequency
It sounds to me like your radio audio circuits do not have a flat response.? For best function, the radio should reproduce audio levels equally across the spectrum, not suppress or enhance different parts of the audio passband at different levels.? That is something that would be good for voice ¨C NOT for digital.
If your radio has a microphone equalizer, you may want to zero it out.? My ICOPM has a separate input for digitan that has a flat passband.
Best of luck!
? Vy73 - Mike - KD5KC. El Paso, Texas - DM61rt. SOTA W5T-Texas Association Manager. ? ? ? ? ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of Tom Schmidt via groups.io Sent: Wednesday, November 20, 2024 21:54 PM To: [email protected]Subject: [winfldigi] Signalink audio level changes with frequency ? Hi there. When I operate digital modes in FLDigi using my Signalink USB, why does the audio level change when frequency is changed? I'll operate, say, PSK31 on my Yaesu FT-920 at the lower end of the passband at a set audio level. Then, when I change to the higher end of the passband, my audio level will be too high, forcing me to lower it so as not to splatter. When I change back to the lower end of the passband and transmit, my audio level is in the mud, forcing me to turn the audio up. Why is that?
|
Signalink audio level changes with frequency
Hi there. When I operate digital modes in FLDigi using my Signalink USB, why does the audio level change when frequency is changed? I'll operate, say, PSK31 on my Yaesu FT-920 at the lower end of the passband at a set audio level. Then, when I change to the higher end of the passband, my audio level will be too high, forcing me to lower it so as not to splatter. When I change back to the lower end of the passband and transmit, my audio level is in the mud, forcing me to turn the audio up. Why is that?
?
Tom, N8EUI
|
Panos
Steve K4RVA
Dave
K3EUI Barry
Mike Olbrisch