开云体育

I have uploaded the explanation of the rig.xml to the files section of this group. I hope it will be enough to get you started. Remember to change the com port designation and baud rate to match

Hi friends, - my mate G0UZP Paul who is also keen on using fldigi as a future substitute to MixW, alerted me to a problem he encounters on his W-XP laptop. He expressly asked me to publish his query

Hi friends - I must say: fldigi works a charm on my (radio-exclusive) AMD pc with W- XP SP3 through navigator interface with a FT-897. No problems whichoever. Installed it, fiddled around a bit,

Thanks Dave. I may have something set incorrectly here but I haven't found it. So don't rule that out either! Jim differently on

The developers will check to see if the time code behaves differently on the different OS. Dave

When I use <ZDT> (Zulu date time) in my SK macro I get this for a date/time.. 09/23/08 00:43 EST de W1RET sk I don't know where the EST is coming from other than that is the time zone I am in

Hi Jim, and guys Well I decided to have a play and see what dxkeeper was all about. Really an excersise to see if it would run okay with fldigi, and true to form it worked first time. Ran fldigi up,

Hi Jim, The Gateway seems to do the job except for the frequency which I think Rick is working on. I do not use cat so I am going to wait till Rick gets the frequency working with out cat. Thanks for

There is a gateway that you can use for fldigi and DXKeeper. Browse over to http://www.dxlabsuite.com/download.htm You will find it under Bridges, Gateways, and Extenders. It is listed as

Thanks Rich. 73, Art rich wrote:

1: configure-video-view xmit signal 2: Qsk on right channel can be used to key before and unkey after, but direct cw keying is not possible at this point. (shape factor is a function of the audio

I have three questions: Can you keep the waterfall active during transmit ? When transmitting CW can you use RTS to key the transmitter ? I could only get CW to transmit by using the sound card. I

This program is made to import an ADIF and lookup information that you may need to add to the log entry. While it was not made for Fldigi, it may very well work with the logbook. I don't contest so

For those who are having some difficulty with virtual com ports this version has been reported to work properly with Rigexpert, Navigator, and Rigblaster USB interfaces. Rich WA4SXZ

Hi John Yes of course it does save all parameters, and when saving it will put the adif file called fldigi.adif within your fldigi.files folder. So you should then be able to export it no problem. I

Look on the web site, http://www.w1hkj.com for the latest versions of fldigi and NBEMS, The changes from 3.02 to 3.03 include: * Changes to socket server to correct shutdown process * Added

Thanks for the quick reply Dave. I will try to confirm this as you suggest. This isn't a show stopper as I have a RigExpert Plus interface that can perform the PTT for me. I normally use CAT

Hi Jim It isn't actually fldigi which selects that option. It is built into the hamlib file for the IC703 which has from 3.02 been compiled into fldigi. Whoever wrote the hamib IC703 contribution I

Does fldigi 3.02 support CAT PTT? I haven't been able to find a combination that works. I have rig configuration done and tried various options in it. My present settings are Hamlib, use HamLib,

Hi Bob When first installing fldigi it creates two folders. One in the default folder. and the other fldigi-files. If you are running build 3.02 ignore rigcat and goto hamlib. Go down the list of