I have uploaded the explanation of the rig.xml to the files section of
this group. I hope it will be enough to get you started. Remember to
change the com port designation and baud rate to match your set up
when working with existing xml files of similar equipment. Most of
these were originated and tested on Linux but should be fine.
Rich
WA4SXZ
toggle quoted message
Show quoted text
--- In win-fldigi@..., "Fred" <dl6xaz@...> wrote:
Hi friends -
I must say: fldigi works a charm on my (radio-exclusive) AMD pc with W-
XP SP3 through navigator interface with a FT-897. No problems
whichoever. Installed it, fiddled around a bit, discovered which
settings it needed, and it is in daily use now.
My question is: has anybody heard about the FT-2000.xml being written
or published by someone else? The problem is not that fldigi would not
work with it. To the contrary, also here through the navigator and TTY-
PTT it is usable, though without the additional QRG-indication etc.
When trying e.g. the FT-1000.xml the result was nonsense and fldigi
said "byebye". I had to manually edit the fldigi.prefs to get rid of
entries I did not want.
I looked into the CAT-handbook for the FT-2000 with all required syntax
but got no clue how those xml files are construed. Therefore I would
welcome any hint.
73 Fred DL6XAZ
