Re: Using "PTT via <TXRIG> and <RXRIG>" with N3FJP applications
In FLDigi's N3FJP setup do you have "PTT via <RIGTX> and <RIGRX> checked? I have a TS-590A here and it works just fine.? I see the RIGTX and RIGRX commands in FLDigi's data stream. SEND: <CMD><RIGTX></CMD> SEND: <CMD><PROGRAM></CMD> RCVD: <CMD><PROGRAMRESPONSE><PGM>N3FJP's Amateur Contact Log</PGM><VER>7.0.10</VER><APIVER>2.1</APIVER></CMD><crlf> Mike W9MDB
On Saturday, October 26, 2024 at 09:08:16 AM CDT, Randy WB4SPB <wb4spb@...> wrote: I'm using fldigi 4.2.06 with an N3FJP logging application.? For various reasons, I want N3FJP to control the radio (Kenwood TS-590SG in this case), but although the API integration with N3FJP succeeds in all other respects (e.g. frequency display in the fldigi UI, frequency control via the fldigi UI), fldigi doesn't send the <TXRIG> and <RXRIG> commands to initiate (or stop) transmission.? Other commands are visible in the TCP/IP Data Stream. ? I looked through older posts, and it appears from /g/winfldigi/message/32632 and /g/winfldigi/message/33087 that this problem has been reported before and "might" have been fixed in an alpha release 4.1.23.29.? But if there was a fix there, it does not seem to have progressed to the current version. ? I think I've configured per the documentation, but is there something I'm missing?? Or is this still a bug? ? Thanks and 73, Randy WB4SPB
|
Using "PTT via <TXRIG> and <RXRIG>" with N3FJP applications
I'm using fldigi 4.2.06 with an N3FJP logging application.? For various reasons, I want N3FJP to control the radio (Kenwood TS-590SG in this case), but although the API integration with N3FJP succeeds in all other respects (e.g. frequency display in the fldigi UI, frequency control via the fldigi UI), fldigi doesn't send the <TXRIG> and <RXRIG> commands to initiate (or stop) transmission.? Other commands are visible in the TCP/IP Data Stream.
?
I looked through older posts, and it appears from /g/winfldigi/message/32632 and /g/winfldigi/message/33087 that this problem has been reported before and "might" have been fixed in an alpha release 4.1.23.29.? But if there was a fix there, it does not seem to have progressed to the current version. ?
I think I've configured per the documentation, but is there something I'm missing?? Or is this still a bug?
?
Thanks and 73,
Randy WB4SPB
|
Hi Dave,
?
You’re ?very welcome!
?
—
Graeme
|
Works great now. Thanks a lot
for the tip.
Dave
On 10/24/2024 2:15 AM, G Davidson
wrote:
Hi Dave,
?
It could be that RSID is set only to detect RSID signals only
between the dotted lines a not the entire waterfall bandwidth.
As a result you may have noticed RSID wasn’t triggering as
often.?
?
If you right hand click the RSID button at
the top right of Fldigi, an option to toggle the behaviour will
appear and with that, the extra cursors removed. At the same
time the color of the RSID button will change between green and
red depending on your selection.?
I hope that helps!
?
—
Graeme
--
73's de NU4N
-- 73'S DAVE NU4N
|
Hi Dave,
?
It could be that RSID is set only to detect RSID signals only between the dotted lines a not the entire waterfall bandwidth. As a result you may have noticed RSID wasn’t triggering as often.?
?
If you right hand click the RSID button at the top right of Fldigi, an option to toggle the behaviour will appear and with that, the extra cursors removed. At the same time the color of the RSID button will change between green and red depending on your selection.?
I hope that helps!
?
—
Graeme
|
One little minor change I would
like to change. my cursor over the incoming signal has 2 dotted
lines every next the the signal on the waterfall. How do I get
rid of the lines?
Thanks Dave
On 10/23/2024 8:13 AM, David Tucker
wrote:
Thanks for the reply Graeme.
I would have never thought to look at that setting let a lone
finding it. Everything is back to normal.
Really appreciate your help.
Thanks Dave
On 10/22/2024 4:41 PM, G Davidson
wrote:
Hi Dave,
?
Perhaps the UI setting shown in the message linked below
will allow you to revert it. On mine, the default was “gtk +”
?
?
—
Graeme
--
73's de NU4N
--
73's de NU4N
-- 73'S DAVE NU4N
|
Glad to have been of help!
?
--
Graeme
?
On Wed, Oct 23, 2024 at 02:14 PM, Dave Tucker Nu4N wrote:
Thanks for the reply Graeme. I would have never thought to look at that setting let a lone finding it. Everything is back to normal.
Really appreciate your help.
Thanks Dave
|
Thanks for the reply Graeme. I
would have never thought to look at that setting let a lone
finding it. Everything is back to normal.
Really appreciate your help.
Thanks Dave
On 10/22/2024 4:41 PM, G Davidson
wrote:
Hi Dave,
?
Perhaps the UI setting shown in the message linked below will
allow you to revert it. On mine, the default was “gtk +”
?
?
—
Graeme
--
73's de NU4N
-- 73'S DAVE NU4N
|
Hi Dave,
?
Perhaps the UI setting shown in the message linked below will allow you to revert it. On mine, the default was “gtk +”
?
?
—
Graeme
|
How do I revert back to the light theme for FLDIGI. It's set as a silver style scheme at the moment.
I have looked in some earlier posts about theme's but can't find a way back to the original theme.
Any help would be appreciated.
--
73'S DAVE NU4N
|
Re: fldigi and fllog development releases at
Hi David,
?
Thank you for fixing the waterfall colour palette issue. It’s working fine for me now.
?
—
Graeme
|
In case the "Windows snipping tool" is new to you, here's the deal:
Hold down little "windows?black box [between Fn and Alt keys]. While it's down, also press the SHIFT and the S keys simultaneously. That action will cause the screen to go partly dark, but will expose a little red cross. Once the little red cross appears, you can release the three keys you lend down.
Now, if you press the left-button down on the mouse, you can drag the little?red cross around?and down, to outline the area of the desktop window that you want to grab. You can make the little rectangle any size you need. Once you have the area of interest framed, release the left moist?button.
That portion of the window is now available to be pasted wherever?you want. The easiest?
PASTE command?ins CTRL+V.? [Note: The image gets stored into the?"Clipboard" in Windows... [find that directory on your own.]
This screen-image tool has other options, but just what I have told you here does most of what you want.?
Here are a couple of examples, that I have done out of this email itself: TINY LITTLE FRAGMENT OF THE SCREEN:
Here's a bigger one, done same way:
SEE?-- Easy as pie... 73 Bill K2TNO
try using windows snipping tool to capture the screen
Dave Garber VE3WEJ / VE3IE
On Mon, Oct 21, 2024 at 4:58?PM Dave Tucker Nu4N via <dwtucker19= [email protected]> wrote: I was working on my FLDIGI with my ICOM 7300. Tx is working great but I am getting strange characters on the RX screen. Looks similar to Japanese.
I must have something set wrong?
Any help would be appreciated.
--
73'S DAVE NU4N
|
I have FLDIGI on the screen but it is a metallic color. How to I reset the screen back to normal?
Thanks
--
73'S DAVE NU4N
|
I figured it out Dave. It was
character set was not set correctly. Copy is fine now.
Thanks for the reply.
On 10/21/2024 4:26 PM, Dave Garber
wrote:
try
using windows snipping tool to capture the screen
Dave Garber
VE3WEJ / VE3IE
On Mon, Oct 21, 2024 at
4:58?PM Dave Tucker Nu4N via <dwtucker19= [email protected]>
wrote:
I was working on my FLDIGI with my ICOM 7300. Tx is
working great but I am getting strange characters on the RX
screen. Looks similar to Japanese.
I must have something set wrong?
Any help would be appreciated.
--
73'S DAVE NU4N
--
73's de NU4N
-- 73'S DAVE NU4N
|
Sorry for the post I changed
the character set and now I am able to copy just fine.
Dave
On 10/21/2024 3:58 PM, Dave Tucker Nu4N
via groups.io wrote:
I was working on my FLDIGI with my ICOM 7300. Tx is working
great but I am getting strange characters on the RX screen.
Looks similar to Japanese.
I must have something set wrong?
Any help would be appreciated.
--
73'S DAVE NU4N
--
73's de NU4N
-- 73'S DAVE NU4N
|
try using windows snipping tool to capture the screen
Dave Garber VE3WEJ / VE3IE
On Mon, Oct 21, 2024 at 4:58?PM Dave Tucker Nu4N via <dwtucker19= [email protected]> wrote: I was working on my FLDIGI with my ICOM 7300. Tx is working great but I am getting strange characters on the RX screen. Looks similar to Japanese.
I must have something set wrong?
Any help would be appreciated.
--
73'S DAVE NU4N
|
I was working on my FLDIGI with my ICOM 7300. Tx is working great but I am getting strange characters on the RX screen. Looks similar to Japanese.
I must have something set wrong?
Any help would be appreciated.
--
73'S DAVE NU4N
|
Re: fldigi 4.2.06 posted at
Thank you Dave! The new delayed QSY macro tag works perfectly with my G106!
?
73! de HA3MGA Gabor
|
fldigi and fllog development releases at
Index of /alpha/fllog
commit
04f7b0cc942612e5174594b2dab99cdce3a16aa2
Author: dave-w1hkj <w1hkj@...>
Date:?? Sat Oct 19 20:47:41 2024 -0500
??? alpha
commit f6928791bcd46949d13d745dc34dea14494d8661
Author: dave-w1hkj <w1hkj@...>
Date:?? Sat Oct 19 20:47:23 2024 -0500
??? Hell modes
?? ?
????? * dup check all Hell submodes as a single mode
commit c5766d56911ef79f5441740bfe5867ebe66493b0
Author: dave-w1hkj <w1hkj@...>
Date:?? Tue Jan 16 20:00:00 2024 -0600
??? Version 1.2.8
=======================================================
and
Index of /alpha/fldigi
commit
53d71ba5e6a32a0944398dfdb3af237a529e2201
Author: dave-w1hkj <w1hkj@...>
Date:?? Sat Oct 19 19:51:00 2024 -0500
??? alpha
commit 6eae131e98abb68c477f214bb87c3072ae42b1ee
Author: dave-w1hkj <w1hkj@...>
Date:?? Sat Oct 19 20:53:24 2024 -0500
??? Hell modes
?? ?
????? * Make all modes equal for duplicate test.? Include
??????? mode designations prior to ADIF conformance code change.
commit b4e763fe467d8067c4b420d53c4859327fed02c9
Author: dave-w1hkj <w1hkj@...>
Date:?? Fri Oct 18 06:37:04 2024 -0500
??? ui_colors
?? ?
????? * fix bugs introduced by commit 9bd273df32722882f4761651
commit ea5302cfe740a469354f98f9a3300351ac3d3b64
Author: dave-w1hkj <w1hkj@...>
Date:?? Fri Oct 11 08:51:29 2024 -0500
??? Version 4.2.06
73, David, W1HKJ
|
I want to thank all of you for input. All of your suggestions were very helpful. After my company leaves this weekend, I'm going to review all of your suggestions and play with my Fldigi settings. I'll let you know how things work out. I appreciate your time and committment to helping me. Thank you.?
?
Darryl
|
Dave