In FLDigi's N3FJP setup do you have "PTT via <RIGTX> and <RIGRX> checked?
I have a TS-590A here and it works just fine.? I see the RIGTX and RIGRX commands in FLDigi's data stream.
SEND:
<CMD><RIGTX></CMD>
SEND:
<CMD><PROGRAM></CMD>
RCVD:
<CMD><PROGRAMRESPONSE><PGM>N3FJP's Amateur Contact Log</PGM><VER>7.0.10</VER><APIVER>2.1</APIVER></CMD><crlf>
Mike W9MDB
On Saturday, October 26, 2024 at 09:08:16 AM CDT, Randy WB4SPB <wb4spb@...> wrote:
I'm using fldigi 4.2.06 with an N3FJP logging application.? For various reasons, I want N3FJP to control the radio (Kenwood TS-590SG in this case), but although the API integration with N3FJP succeeds in all other respects (e.g. frequency display in the fldigi UI, frequency control via the fldigi UI), fldigi doesn't send the <TXRIG> and <RXRIG> commands to initiate (or stop) transmission.? Other commands are visible in the TCP/IP Data Stream.
?
I looked through older posts, and it appears from
/g/winfldigi/message/32632 and
/g/winfldigi/message/33087 that this problem has been reported before and "might" have been fixed in an alpha release 4.1.23.29.? But if there was a fix there, it does not seem to have progressed to the current version.
?
I think I've configured per the documentation, but is there something I'm missing?? Or is this still a bug?
?
Thanks and 73,
Randy WB4SPB
