Thanks Mike- Moving the left control (UPPER SIGNAL LEVEL) to -51 shows dark blue background and received signals in yellow.? ?(SIGNAL RANGE) was at 60.?? My transmit signal with these settings is red with yellow background....too high. 73 Jay W6CJ
|
Bottom left of FLDigi when the button says "WF" there are two controls for the waterfall view. You are correct that you should not need to change anything on the rig.
Adjust the two controls up/down to see the effect.
Normally you would decrease the left (upper level) until you see a blue background -- then increase the right (signal range) until you see the signal the way you like.
Mike W9MDB
On Saturday, September 7, 2024 at 02:20:04 PM CDT, Jay W6CJ via groups.io <lastradioman@...> wrote:
Hi Group,
I have JS8CALL working fine along with my IC-7300, and should not have to change the IC-7300 settings.
FLRIG/FLDIGI, another story:?? I am able to control frequencies and modes in the 7300, as well as transmit and see transmit audio on the waterfall.? ?But on receive, the waterfall is black.? I don't think it is copying stations.? Without touching my IC-7300 settings, how do I set audio level in FLDIGI or set the waterfall?
Thanks & 73 Jay W6CJ
|
Hi Group,
I have JS8CALL working fine along with my IC-7300, and should not have to change the IC-7300 settings.
FLRIG/FLDIGI, another story:?? I am able to control frequencies and modes in the 7300, as well as transmit and see transmit audio on the waterfall.? ?But on receive, the waterfall is black.? I don't think it is copying stations.? Without touching my IC-7300 settings, how do I set audio level in FLDIGI or set the waterfall?
Thanks & 73 Jay W6CJ
|
Use the driver on the Yaesu web site for the FT710.?
?
FT-710 Firmware Update Information (2/29/24)
?
?FT-710 USB Driver Virtual COM Port Driver (Windows 11/10)?
?
Dave.? WA7DH?
|
Which yaesu download for the Ft 710 for windows 10 do u use??
?
confused i'm new at this.?
|
Re: Flrig - reorder the list of modes? (FT-991)
Hello Kevin,
?
You can find here a tutorial for FT-991A with RigCAT.
?
73,
?
HA3MGA Gabor
|
Re: Flrig - reorder the list of modes? (FT-991)
Thanks I'll investigate rigcat
|
Re: Flrig - reorder the list of modes? (FT-991)
If you use RigCAT then you might do it with editing of the FT-991A.xml file:
?
?
The order of modes are exactly the same in the drop down as in the XML file.
I didn't try it, but it might work...
?
73! de HA3MGA Gabor
?
|
Re: flrig 2.0.05.66 development test version posted
Thanks for adding the Memory sort and color tweaks!
?
Dark mode screen shot
?
|
Re: Flrig - reorder the list of modes? (FT-991)
Kevin,
Have a look at the source code. It looks like several lists would need to reordered and maybe other code changed to reorder the list successfully. Have a go at it and see what you can do.
toggle quoted message
Show quoted text
On Aug 31, 2024, at 08:17, Kevin KD9SPR via < kwerner@...> wrote:
Something that groups the modes, alphabetically or logically like this would make it easier for my brain & eyes to find the mode I'm looking for:
USB?
LSB
FM-N
AM
RTTY-L
DATA-U
DATA-L
DATA-FM
C4FM
?
Or all the USB modes, then all the LSB, etc.
?
|
Re: Flrig - reorder the list of modes? (FT-991)
Something that groups the modes, alphabetically or logically like this would make it easier for my brain & eyes to find the mode I'm looking for:
USB?
LSB
FM-N
AM
RTTY-L
DATA-U
DATA-L
DATA-FM
C4FM
?
Or all the USB modes, then all the LSB, etc.
?
|
Re: Fouled up Fldigi - Flamp communication under Windows
Thanks, all!? I tried the alpha version that Robert suggested and everything is working again.? Thanks to everyone!!!? I'm a bit mystified as to what happened, to be honest.? I could have sworn it was working fine before I fat-fingered things.? But maybe I upgraded Flamp but didn't use it right away, and discovered the problem later?? At any rate, some lessons learned:
?
- the winfldigi.groups.io group is a great resource!
- if things aren't working, add reverting to the list of things to try
- when upgrading, always try the new version afterward
?
I'm going to mention them to our next ARES/RACES Fldigi and friends Sunday practice net.? BTW I'm the RACES officer and assistant ARES officer in Howard County MD.? We have adopted Fldigi/Flmsg/Flamp as our primary method to exchange complex data when we do drills.? In our last few Fire Station alerting drills (where we practice sending dispatch messages in case our electronic dispatch system goes down) we've demonstrated about 10X speed increase over passing data by voice, and of course we can also pass pictures too.? BTW in that regard, Google's Squoosh tool is a terrific, easy to use image conversion/compression tool.? One of the great features of Fldigi is that it passes through our repeaters at the full 8PSK1200F rate, with no problems.
?
We also use Winlink radio email with VARA FM because other ARES jurisdictions around us like it, and it has its advantages but it also has some serious disadvantages.? I prefer Fldigi when we don't have to interoperate.
?
And of course, thanks to Dave W1HKJ the inspiration behind it all!
?
73, Dan N3YQ
?
|
Re: Newbie IC-7300 setup help?
Please dont forget to set PKTUSB in the upper left corner under the freq window od fldigi..
--
73
Karl
KI4ZUQ
|
Re: Newbie IC-7300 setup help?
Jay,
Be sure the 7300 is in USB-D mode in fldigi. If using hamlib for rig control it shows as PKTUSB I believe it is.
Check the Tx Attenuator setting, bottom row right side below the waterfall. Default is -12, but depending on the volume set in the Windows mixer it often needs to be a smaller number.?
toggle quoted message
Show quoted text
Group- My IC-7300 works fine, using JS8CALL and a USB connection to a Win-11 PC.
I'd like to get FLDIGI working, without having to change the IC-7300 or PC soundcard settings each time I switch between JS8CALL and FLDIGI.
So far- - FLDIGI controls the IC-7300 frequency and PTT.
- When I? sent a PSK31 CQ, the 7300 goes into TX mode but no RF output is seen in the 7300 meters.??
- I could see the outgoing CQ text and PSK31 on the FLDIGI waterfall display
- The receive FLDIGI waterfall display looks very dark.? No signals seen, although heard in the 7300.
Thanks & 73, Jay W6CJ
|
Re: Newbie IC-7300 setup help?
I use FLrig to VFO/PTT Fldigi.? I use the same setup for my IC 7100 and IC 705. The above program should work with the IC 7300.
73
Don Poaps
New Westminster, BC
VA7DGP DATA VA7QU ? VOICE Winlink:?va7dgp@...
Subject://wl2k ? ? ? ? ?
ALLSTAR ?530780
Hamshack Hotline5971
Mid-Island Phone Mesh 2210 2232
? ? ? ? ? ? ? ? ? ?
|
Newbie IC-7300 setup help?
Group- My IC-7300 works fine, using JS8CALL and a USB connection to a Win-11 PC.
I'd like to get FLDIGI working, without having to change the IC-7300 or PC soundcard settings each time I switch between JS8CALL and FLDIGI.
So far- - FLDIGI controls the IC-7300 frequency and PTT.
- When I? sent a PSK31 CQ, the 7300 goes into TX mode but no RF output is seen in the 7300 meters.??
- I could see the outgoing CQ text and PSK31 on the FLDIGI waterfall display
- The receive FLDIGI waterfall display looks very dark.? No signals seen, although heard in the 7300.
Thanks & 73, Jay W6CJ
|
Re: IC-7300 keys but no power out
The 7300 needs to be in USB-D in order to receive audio from the computer.
USB-D will work fine with all software.
Mike W9MDB
?
Worked before so it had to be something different. Worked perfectly before so what was different. Would not be able to receive and decode if not in USB-D. Would not be able to key transmit if not in USB-D. The one thing that was different was it was in USB. It needed to be, in addition to 50 other settings, in PKTUSB. THEN it worked as before. It is working now.
?
But hey, thank you!
--
73
Karl
KI4ZUQ
|
Re: IC-7300 keys but no power out
The 7300 needs to be in USB-D in order to receive audio from the computer.
USB-D will work fine with all software.
Mike W9MDB
toggle quoted message
Show quoted text
On Wednesday, August 28, 2024 at 06:04:05 PM CDT, Karl via groups.io <karlshumaker@...> wrote:
Karl & Group,
?
Same here:??
IC7300 and JS8CALL working fine and don't want to change the IC-7300.? 7300 keys but no power out.
tnx & 73
Jay
W6CJ
On Wed, Aug 28, 2024 at 8:44?AM Karl via?groups.io
?
There is on here somewhere a step-by-step set-up for the IC-7300 for digital. What version of fldigi are you using? The very last thing that needs to be selected on fldigi is PKTUSB. Even if all other settings are correct and this last setting is USB it will not put out power! It will key the transmitter but no power out.
--
73
Karl
KI4ZUQ
|
Re: IC-7300 keys but no power out
Karl & Group,
?
Same here:??
IC7300 and JS8CALL working fine and don't want to change the IC-7300.? 7300 keys but no power out.
tnx & 73
Jay
W6CJ
On Wed, Aug 28, 2024 at 8:44?AM Karl via?
?
There is on here somewhere a step-by-step set-up for the IC-7300 for digital. What version of fldigi are you using? The very last thing that needs to be selected on fldigi is PKTUSB. Even if all other settings are correct and this last setting is USB it will not put out power! It will key the transmitter but no power out.
--
73
Karl
KI4ZUQ
|
Re: IC-7300 keys but no power out
Karl & Group,
Same here:?? IC7300 and JS8CALL working fine and don't want to change the IC-7300.? 7300 keys but no power out. tnx & 73 Jay W6CJ
Works on WSJT-X and JS8call: click tune button, keys transmit, radio shows selected power, TX lights up. All that on fldigi shows line on waterfall, tile showing elapsed time turns maroon and counts u
|
DuckDuckGo did not detect any?trackers.
|
|
|
|
Works on WSJT-X and JS8call: click tune button, keys transmit, radio shows selected power, TX lights up. All that on fldigi shows line on waterfall, tile showing elapsed time turns maroon and counts up but no power shows on radio. All hamlib settings as before and checked radio settings but they are the same for all modes mentioned. Radio transmits and shows power out on CW.
?
WHAT is different with fldigi? Worked perfect in the past....
--
73
Karl
KI4ZUQ
|
Jay W6CJ
Dan N3YQ Maryland
Karl
Don Poaps