开云体育

If this helps Hamlin is for cat control. Decodes come from selecting the correct audio feeds. (Audio codec) this depends on your radio sent by ve3wej on samsung s21+ [email protected]> wrote:

I have been trying to get FLDigi to work for months.? I have watched youtube videos until my brain has turned to mush.? I have gone through the user manual.? I have reached out to my local club

I have been doing digital on this rig and PC a long time. To ensure the USB settings aren't confused with the PC mic and speaker, I renamed them to From_Rig and To_Rig. I am fairly familiar since I

Hello David, Thank you, and what you describe is what I had (or rather would have) assumed, too! And it's the reason why I could not answer Kim's e-mail right away, when he stated, that he was

I believe fldigi will do afsk. Not sure of fsk. sent by ve3wej on samsung s21+ [email protected]> wrote:

Ed.. I'm not at home at the moment but here's a thought: Check the setups where you define FLDIGI as the client of FLRIG. Second, go the Device Mgr and see that the Audio menu shows the

Jack, I found that the Microphone Array? Reltek Audio volume was set to around 25%. I brought it up to 100% and lowered the Signal range and upper signal level values.? And now (which I don't like)

Hello, a bit frustrated here..I thought I would try this weekend with my FT-891. I am in Belize and have never used my 891 on RTTY. The current equipment is a Windows 11 PC, FT891, and a digirig. I

The AFC button is grayed out ONLY if the modem in use does not employ AFC. This will be true for all DominoEX, Thor, FSQ, IFKP, MT63, etc. The kind of drift reported is usually caused by VFO offset

Hello Drew, You are right, but this screenshot was taken while compiling 'TX generate' a radiogram, thus it was normal to not see an input signal. The problem rather is the 'impossibility' to

The diamond shaped indicator - to the left of the afc button - being black tells me there is something wrong with your incoming audio to the computer. The audio volume is too low. I don't know if that

Run that -47 value to around -10 and the right number to 60 N4VAD [email protected]> wrote:

Hi Ken, Great to see there is progress! I am not familiar with the ASUS laptops. My fldigi setup uses the Upper Signal Level setting at -5dB and the Signal range at 80dB. Where you show -47dB and

My laptop is an ASUS VivoBook intel Core i7. Jack, With your last instructions, things got better. I had to increase these values higher than I have to in windows 10 in order to see a signal in the

Hello David, I have a (stupid?) question. Kim (SW Radiogram) tried fldigi ver4.2.06.20 and had trouble with the audio offset slowly drifting off to higher frequencies, while producing his

Hi Ken, Maybe a no-brainer, but take a quick look at the attachment, regarding audio levels. 73s Tobias .-.-

Hi Ken. Dell laptop or desktop? Looks to me like you need to set your Microphone Array as the default microphone device (not the Microphone 2-USB Audio CODEC) and the Realtek Audio Speakers as your

Phil, That is the way the instructions said to do when I first started using Fldigi on windows 10.

Ken, I am a little concerned your default sound devices are the audio codecs. This can result in system noises being transmitted over the air. 73 Phil GM3ZZA ________________________________ Sent:

Jack, This is what I have in the sound settings. The water fall doesn't have any noise or signal displayed unless I bring up the signal levels in the bottom left panes. Then I can see an in coming