开云体育

Ed..
I'm not at home at the moment but here's a thought:
Check the setups where you define FLDIGI as the client of FLRIG.

Second, go the Device Mgr and see that the Audio menu shows the correct CODECS.
t
Then, go to lower right of Desktop and choose Sound settings by clicking the speaker icon. Scroll through to see that the PC is using the audio codec for both "speaker" and "Mic"
Under the mic part, be sure that the mic icon doesn't have a slash through it. If it does, click to turn on the mic.

Others may chime in, but I'll watch this thread and recontact you from my rig.

Good luck
73
Bill K2TNO

On Fri, Feb 7, 2025, 4:15?PM Ed Terry via <w8qh.tx=[email protected]> wrote:

Hello, a bit frustrated here..I thought I would try this weekend with my FT-891. I am in Belize and have never used my 891 on RTTY.

The current equipment is a Windows 11 PC, FT891, and a digirig. I have used JS8call, WSJT-x, VARAC, digital modes, no problem.

Flrig 2.0.0.4 is my rig control and love it.

FLdigi 4.2.06 I use for keyboard CW, Wefax and so on.

However I am stumped, the online manual for RTTY is for an older version of Fldigi.

Here is what happens in different modes with FLrig and Fldigi

RTTY-45 - op mode

FLdigi set on USB - "per the manual" - nothing happens., no audio

FLdigi set on RTTY-L , solid tone?

FLdigi set on RTTY-U, solid tone

Fldigi set on Data-U no tones

NOW,

If I have Flrig off, then FLdigi only shows RTTY as option but again no tone nothing goes.

Anyone out there got a working configuration?

73's

V31XE

Ed

?