开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. Winfldigi
  2. Messages
Single Messages Topics Expanded Polls

Re: Earlier Version of Fldigi

 

开云体育

Hi Ken.

Dell laptop or desktop?

Looks to me like you need to set your Microphone Array as the default microphone device (not the Microphone 2-USB Audio CODEC) and the Realtek Audio Speakers as your default device (right click on the ones to set as default and select). I found that fldigi doesn't like it.

You probably know from past Windows versions that you can set the levels by double clicking on the ones you want to adjust, in this case both 2-USB Audio CODEC devices.
In the 2-USB Audio CODEC settings pop-up:
Make sure on? the? Enhancements tab that everything is disabled
Make sure on the Advanced tab that "Allow appllications" and "Give exclusive" boxes are checked.
You may need to shut down fldigi then restart it to get it "talking" to the drivers.
BTW - I set my Playback sound device at MAX and adjust the TX drive in fldigi by setting the dB indicator (bottom right area) to -24 to get the right TX level. Make sure you save configuration in fldigi after you get it right.

Another hint: If you get it talking, check these setting in your "top level" sound settings to see if they match mine:
Jack Spitznagel
KD4IZ FM19oo
Parkton, MD
On 2/6/2025 10:53 AM, Ken Smith via groups.io wrote:

[Edited Message Follows]

Jack,?
?This is what I have in the sound settings.
The water fall doesn't have any noise or signal displayed unless I bring up the signal levels in the bottom left panes. Then I can see an in coming signal to?
pick on. Then the signal in the right side of the water fall will show up in green.? I just discovered this.
In windows 10 I usually have those signal levels at 20 and 40.? In windows 11, I have to raise them really high for even noise to show up in the WF.
?
?
?
?
?
Join [email protected] to automatically receive all group messages.