开云体育

When in doubt - restart ? IT rule #2 ? Yes - i've tried that as well. <jc-barbera@...> wrote:

I'm new to this software. I sometimes have difficulties. I've noticed that it's sometimes necessary to close the software for changes to take effect. Jean-Christophe BARB?RA

Hmm - did have *<# TXRSID:on>* in my macro (which should mean that it isn't executed, right?) but I removed that line all together and it is still behaving this way. The only button I have turned on

Ron, I have tried with my Jupiter (green screen) several times. No joy.? I have been successful when I select Pegasus mode. It works but of course you can only control from flrig. I didn't like that

Don't get me going Bob on being inconvenienced, lazy, or pressed for time.? Neither is the case here. I'm working on a station automation project with NodeRed and Stream Deck. The LK button is one

Check if the macros have TXID. If so, TXID and rxid must be enabled. F5ind 73 Chris Jean-Christophe BARB?RA

I had it working fairly well but now, suddenly - something has happened so as my IC7300 is transmitting the tone, the radio releases the PTT , pauses and reengages the PTT and continues!? I read

I tried selecting LK and then SAVE CONFIG. Exited the program and then reloaded the program. LK was not restored. I was reading on another site where the operator found that pushing a button was

Hi all, I am trying to connect my Jupiter to FLRig v2.0.05 on Win11.? The connection is USB.? I know the connection works.? I have used it successfully with Winlink RMS Trimode.? I tried the

It does not.

Not sure, but if you set it on, then go to configure, then drop down to save config. it may save for next startup Dave Garber VE3WEJ / VE3IE <randybuxton@...> wrote:

I want the LK button to be ON when I start up Fldigi. I know that a script can accomplish this task. I don't want to push the buttons to execute the script. I want the LK button ON every time I start

Hi Chris, Sorry, I must have missed the email that said about your successes with the other programs.... I hope that you find the answer.... Best 73 and good DX. de WA3ZSC - Jerry

Jerry This configuration (icom7700 and interface rigexpert) works perfectly with three other software programs (logger32/n1mm and 2tone/ and mmtty). This would make me think more of a problem

Hi Chris, OK. Sorry about that.... have you checked to make sure that Windows has not powered down your USB ports? Check in Control Panel, Power Options. Make sure that the computer is not shutting

Hey Jerry, No, it doesn't work. Thanks for your help anyway. 73 f5ind Chris Jean-Christophe BARB?RA

Okay Jerry. I understand the procedure. I didn't think so. I'll try it and give you feedback. Because I can't think of any further research. I think I've covered all the important points. Sound card,

Hi Chris, I am not a developer, but I will give you a possibility. I am not familiar with your interface, but if you are running FSK for RTTY, then there is a chance that your FSK port has gotten

Setup: Icom ic7700. Interface rigexpert TI5000. hello. it only outputs tone and power, without shift. I am on the settings of another device. the macros are functional with another station. the

Thanks John. Hey long time to talk to. I am getting set up for the St. Pat's day sprint. Hope to work you again. Take care Dave -- 73's de NU4N