开云体育

Jay, Could be a corrupted fldigi config file. You can test for that by going to c:\Users\<loginname>\fldigi.files and rename the flidigi.prefs file then try to start fldigi. If that works then you're

is it possible that fldigi never shut down properly, and your new start is causing an issue?? check task manager Dave Garber VE3WEJ / VE3IE [email protected]> wrote:

Hi Group, Had something unusual happen: I had FLRIG-FLDIGI working just fine with an IC-7300. Yesterday, FLRIG seemed OK, but FLDIGI pops up for two seconds and then disappears. Any suggestions?

Hi Group, I had FLRIG/FLDIGI up and running until this afternoon: Now, when I start FLRIG, my FLDIGI screen pops up for a second and then goes away. Appreciate any suggestions. 73 Jay W6CJ

I am attempting to run the latest version of Fldigi 4.2.05 under Win 7. It seems to load okay, but at startup I get the error: Assertion Failed! Program ... Fldigi.exe ?

Reduce the monitored transmit signal level.? This is actual just an FFT transformation of the transmit audio signal. David

Thanks Mike- Moving the left control (UPPER SIGNAL LEVEL) to -51 shows dark blue background and received signals in yellow. (SIGNAL RANGE) was at 60. My transmit signal with these settings is red with

Bottom left of FLDigi when the button says "WF" there are two controls for the waterfall view.You are correct that you should not need to change anything on the rig. Adjust the two controls up/down to

Hi Group, I have JS8CALL working fine along with my IC-7300, and should not have to change the IC-7300 settings. FLRIG/FLDIGI, another story: I am able to control frequencies and modes in the 7300, as

Use the driver on the Yaesu web site for the FT710. FT-710 Firmware Update Information (2/29/24)

Which yaesu download for the Ft 710 for windows 10 do u use? confused i'm new at this.

Hello Kevin, You can find here a tutorial for FT-991A with RigCAT. /g/winfldigi/message/36986 73, HA3MGA Gabor

Thanks I'll investigate rigcat

If you use RigCAT then you might do it with editing of the FT-991A.xml file: The order of modes are exactly the same in the drop down as in the XML file. I didn't try it, but it might work... 73! de

Thanks for adding the Memory sort and color tweaks! Dark mode screen shot https://ibb.co/5RKGXb6

Kevin, Have a look at the source code. It looks like several lists would need to reordered and maybe other code changed to reorder the list successfully. Have a go at it and see what you can do. 73,

Something that groups the modes, alphabetically or logically like this would make it easier for my brain & eyes to find the mode I'm looking for: USB LSB CW-U CW-L FM FM-N AM RTTY-U RTTY-L DATA-U

Thanks, all!? I tried the alpha version that Robert suggested and everything is working again.? Thanks to everyone!!!? I'm a bit mystified as to what happened, to be honest.? I could have sworn it

Please dont forget to set PKTUSB in the upper left corner under the freq window od fldigi.. -- 73 Karl KI4ZUQ

Jay, Be sure the 7300 is in USB-D mode in fldigi. If using hamlib for rig control it shows as PKTUSB I believe it is. Check the Tx Attenuator setting, bottom row right side below the waterfall.