开云体育

Karl & Group, Same here: IC7300 and JS8CALL working fine and don't want to change the IC-7300. 7300 keys but no power out. tnx & 73 Jay W6CJ yahoo.com_at_groups.io_lastradioman@...> wrote:

Ah, this probably explains my problem! I have no Tx on my QMX with FLDIGI. I have been struggling to understand how PTT is implemented in the QMX. WSJT-X works fine so I was thinking it was FLDIGI,

It was the PKTUSB setting. Working fine now. Worked before but I musta touched something... -- 73 Karl KI4ZUQ

Check fldigi soundcard settings. Also the Tx attenuator, lower right corner fldigi. If too low no power out. 73, Cliff, AE5ZA

PKTUSB not just USB, upper left, below freq panel, NONE AM CW USB LSB RTTY FM WFM CWR RTTYR AMS PKTLSB PKTUSB PKTFM SAM SAL SAH -- 73 Karl KI4ZUQ

Works on WSJT-X and JS8call: click tune button, keys transmit, radio shows selected power, TX lights up. All that on fldigi shows line on waterfall, tile showing elapsed time turns maroon and counts

And the wording in the manual is really funky...they do say you get 3 reading but the format they only show 1 reading. It should beRMP1P2P2P2P2P3P3P3P3P4P4P4P4; And P1 is always 0 Mike W9MDB

Hamlib has this logic for the TS480 and TS590 models ? ? retval = sscanf(ackbuf, "RM1%d;RM2%d;RM3%d;", swr, comp, alc); Mike W9MDB

Hi David, congratulations on your nuptials! I am happy to hear this wonderful news. What I was saying with "three readings at once" was that the radio responds to an RM; command with a 24 character

Eric, Your code looks fine.? Please be more precise on the three readings at once.? That seems to be an undocumented feature that we should support for the SG David P.S.? My replies are tardy as I

Use this version, it's an Alpha but it will be the next official release once Dave has the time to publish it. http://www.w1hkj.com/alpha/flamp/ Robert

That's good news Pat. Enjoy! 73, Cliff, AE5ZA

Rich, thanks for reminding me of the http / https translation.? I never considered that.? This allowed be to get the current version of Fldig. Cliff, RX-TX was set to UTF-8.? I was able to get the

We should also recall that some browsers change the http address to https, and that points elsewhere...the source of many complaints in the past, and many posts here as we researched why folks were

We should also recall that some browsers change the http address to https, and that points elsewhere...the source of many complaints in the past, and many posts here as we researched why folks were

Use http:// not https://. Phil GM3ZZA

No way to reorder other than recompile. What order are you wanting and why? Mike W9MDB

Pat, Open the fldigi configuration window and check this to be sure you UTF-8 showing. 73, Cliff, AE5ZA

Pat, Where are you getting your file from? Normally people get it from SourceForge https://sourceforge.net/projects/fldigi/files/fldigi/fldigi-4.2.05_setup.exe/download

Is there any way to reorder the list of modes shown in the Flrig Mode pulldown?? My FT-991a has the normal modes then data-u data-l data-fm cw-u cw-l c4fm.? Is there some sort of definition file for