开云体育

Hi, I recently bought a UHF XPR 8300 repeater and a UHF XPR 5550 at a hamfest. I'm planning on using these on a commercial pair. I was hoping to use enhanced encryption for this, which I think

There is adequate documentation on the repeater-builder website. Don't forget to save the codeplug as received (you need a 32-bit Windows OS). Some programming settings are required for the wireline

I prefer to use the 8 pin modular cable.? That allows me to go to a site and make programming changes from the front panel of the repeater and not have to go in the back and possibly remove a db-25

Yes Tim. The cables seem to have gone the way of the dodo! Good luck.

Thanks. I did finally figure that out. The guy we got this from had the wires stuffed into the square holes. I moved them to the round holes. I'm getting about 1.6vpp on the rx audio lines, that

Couple items to look at... Wireline card present in the top slot of the cage? Tuner menu Wireline TX audio level turned up (often found Zeroed out)? Set to Full Duplex? The black connector does

Chris, What are you referring to? WZ5TX David “Tyler” Bufkin ________________________________ Sent: Saturday, April 5, 2025 5:11:42 PM To: [email protected]

In California it's Cactus, in Texas it's Armadillo... You know what I'm talking about Jim Reese WD5IYT, sk, had an error message in the Dillo controller that if you entered an unknown command it

ugh...that's as bad as the guy that used to use phonetics...he got banned from just about every repeater and club in nearly 100 miles...I'm sure he got in trouble with 'the man' too...interfering with

I'm trying to figure out why our mtr2000 isn't passing any audio. We're using an external repeater controller through the wireline connector. This is new to us, and we're trying to get things set up

* On 2025 05 Apr 17:48 -0500, Jim Barbour via groups.io wrote: Work out the letters right to left. Hint: The Morse characters are sent in reverse (the clue for me was '.-.-'). 73, Nate -- "The

Sorry, I'm not getting it... BMEK(unknown)DL Huh?

You guys are making me sick here. I haven't heard of people in 6 m down here in Southeast Texas and it's one of my favorite bands! Chris WB5ITT [email protected]> wrote:

Thanks Max. Too involved for me. I thought I could find am SMP2000 prog. cable and program thru the mike jack. (I have no info on the D shell 15 pin connector on rear of radio above power cable.

I've never done it with the MTR 2000 but I suspect it would be channel steering using the GPIOs via wildcard programming.. I've only stuck an MTR 2000 on only one frequency

At 4/5/2025 01:33 PM, you wrote: Many years ago back in the '80s, I was down in Brownsville for a Texas VHFM Society convention and I set my mobile radios up to crossband the popular 2 m repeater to

At 4/5/2025 12:06 PM, you wrote: Yeah Repeater wars it was before I got licensed but the legacy of it still lives San Diego has had many problems with co-existing with repeaters up north, I used to

At 4/5/2025 08:00 AM, you wrote: Sorry to hear about the coordination problems out there. So Cal has its problems with things like a member of our local repeater coordination team hosting an

I'm trying to figure this out. The Moto lit says up to 32 channels and the Wildcard tables show the 96-pin connector GPIOs, but... I don't understand the programming UI. First, is binary channel

At 4/5/2025 03:27 AM, you wrote: Last night at the Orange Club meeting, I saw another testament to the dumbing down of America and ham radio..... The question was asked why the 147.06 rptr was down