开云体育

Hello Jeff, Any plans for the holiday? Just wondering if you would like to go pound sand with me? By the way Tom, you forgot to give your call sign like us respectable hams do! Mick - W7CAT

"There isn't anything in the rules that says you are supposed to transmit every ten minutes that a repeater is available" There probably isn't anything in the rules about me wearing a red t-shirt, but

There is also nothing that says you can’t. Now go pound sand with your buddy Jeff.

Have you ever read Part 97? Do you know what it is about? § 97.119 Station identification. (a) Each amateur station, except a space station or telecommand station, must transmit its assigned call

Jeff, Since you obviously think you must have the last word, go ahead. I’m through dealing with your arrogance and stupidity. Have a blessed day.

Between ensuring they are using FM, best amplitude for mic gain, and when possible a vertical antenna - these things have greatly helped those doing this Jason [email protected]> wrote:

Hi Guys: I am looking for the software and a programming cable for the Hytera MD652U DMR radio. Appreciate any info! Thanks, Ramesh, VA3UV, WA3UV

I quote myself: "Going back to the original discussion regarding DMR beaconing," Perhaps your problems understanding the rules is related to your inability to read what has been written very clearly.

Clearly you were. I was quite clear. YOUR INTERPRETATION of the rules are irrelevant. We’ve been running our repeaters for well over 40 years this way. If it were illegal, we would have gotten a

It is required that you ID during and at the end of activity. It is not required that you identify every 10 minutes when there is no activity. In fact, it is not permitted. Transmitting an ID for no

Even if it was legal to id every ten minutes, I wouldn't monitor a repeater that did that. Just no need for that. Butch Bussen wa0vjr wa0vjr@... irlp 7135 allstar 56023 echolink 790800 new home

Mike audio gain can be much different between SSB, AM and FM operation. They may have to remember what the optimum setting for mike gain is for each mode and reset the control. 73, Joe, K1ike

For 10 and 6 FM I use commercial Motorola Maxtrac/Radius, GE RANGR, GE Orions, Vertex FTL1011, Modified WULFSBERG RT30 and Motorola CDM1250's and I never receive a poor audio complaint for any of

I would have used a different term other than ignorant.

Not at all. Transmitting the repeater ID every 10 minutes is not only legal, but required. Your interpretation. Again, your interpretation.

Totally agree with Jeff WN3A recommendations. I own several radios that operate on 6M, Kenwood TS-690, TS-2000, Yaesu FT-991A, IC-7300. They all provide good audio when audio enhancements are set with

So, you're admitting that what you're doing is wrong, but as long as nobody complains then it's OK? If you have continuous activity (USER activity) for 18 hours straight my hat is off to you, God

* What do they need to pay attention to with their rigs? A lot of HF+6 radios will retain the voice processor settings even when switched to FM mode, so make sure they turn off the mic processor, and

Can't argue with the ignorant! Mick - W7CAT

So, you are going to monitor the frequency 24/7 and testify that something didn’t key the repeater to trigger the ID? Of course you aren’t. The FCC requires we ID every 10 minutes when the