Wireline card present in the top slot of the cage?
Tuner menu Wireline TX audio level turned up (often found Zeroed out)?
Set to Full Duplex?
The black connector does not come off. You use a very small sturdy pin in the round hole above each wire slot that will release the clamp. I use a fairly large diode lead to pop mine open.?
On Sat, Apr 5, 2025, 17:31 dsay2001 via <don.sayler=[email protected]> wrote:
I'm trying to figure out why our mtr2000 isn't passing any audio. We're using an external repeater controller through the wireline connector. This is new to us, and we're trying to get things set up before we go to the site.
Before I try too hard and break something...
Is that 4 pin connector (J6) supposed to come off?
How do I release the wires? I tried pushing into one of the small holes, figuring that would release a clamp. The wires aren't budging.
