开云体育

Hi again... Pulled and built 4.2.06.26 without issue a few days ago, and everything was good. A major OS update appeared "took" without issue, and Fldigi still behaved as one would expect, even after restarts and so on. Great! Fired it all up this morning (March 28th, 10AM UK) and all good. Had to shutdown the PC some time later to move some other hardware about, much easier if I can move the PC and monitors out of the way. Put it all back and started it all again. No issue... But, after a while running in the background (while I did some email's in another UI desktop) while it was running PSK31 mode (that WAS showing the AFC control as able to be used, but NOT active.) On restoring Fldigi to "the front" (AKA "in focus") and active use, that AFC button is again greyed out. But, fiddling with the radio and a steady strong signal, the AFC is ACTIVE, but not working correctly, even though the greyed out button shows it as INACTIVE. And of course, I can't control it. Restarting Fldigi, the PC etc, that AFC button is permanently greyed out, but the underlying AFC functionality is still ACTIVE!.. Someone made mention of the fact that AFC was not valid* for all modes. Where is that information please? As I can't see it in the web help doc's. Only this, in Fldigi's built in help. AFC (AFC) control When this button is pressed, an indicator on the button turns yellow, and the program will automatically retune to drifting signals. When the button is again pressed, AFC is off, and the tuning will stay where you leave it. No mention of which modes it applies to, or not... (* Valid or not, when the control is greyed out, and the LED also shows grey) it seems to be active for all modes, if you watch it's behavior on a busy waterfall, especially a weak signal with stronger ones nearby/encroaching.) So, what on earth is going on? Still confused of Central UK. 73 Dave G0WBX.

Hi all, new to Linux and new to group. Have installed CQRLOG from software manager within Mint-Cinnamon. Opens with database error and will not go any further. My goal is to make Linux my primary OS with Windows on separate drive and would like to have the logger available on Linux drive. Thanks to mediators for letting me in the group and any tips/advice is welcome. 73, Mike K0TQ

After redoing my desktop to the UbuntuMate release 24.10 and installing FLdigi, this came up: configure: error: in `/home/will/Downloads/fldigi-4.2.06': configure: error: The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. Alternatively, you may set the environment variables PNG_CFLAGS and PNG_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. To get pkg-config, see <http://pkg-config.freedesktop.org/>. See `config.log' for more details Is there a way around this to get FLdigi sorted for use? Will 2M0WHN

Started the PC and all is fine. That is until I started WSJTx. Apparently the radio does not communicate with the PC. Did a reinstall of WSJT and updated as best I could but it does not work. So tried JS8Call. Nothing. Same 'problem' has arisen. Which is strange as FLdigi works fine. So it is not a baud rate problem. I checked all those settings is WSJT and radio. Both are fine. Hamlib is working as FLdigi would not TX. So something in an update has gone kaput! Any ideas as to what may have caused this? Will 2M0WHN

I understand that CALL3.txt is filled individually. But still, maybe there are links? Do not suggest links that I know of (http://www.mmmonvhf.de/dbase.php and https://wsjt-x-improved.sourceforge.io/CALL3.TXT).

The Country (CTY) Files were updated on 25 March 2025: https://www.country-files.com/cty-3509-25-march-2025/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse over the word Contest in the menu, then select the software you are using. To install the file, follow the link to your software at the top of the page. If you are interested in a bigger CTY.DAT for everyday logging, you can get it here: https://www.country-files.com/big-cty-25-march-2025/ Note that the release notes (and Version Entity) for this larger file are different than what is shown below. There is a separate link to them. As a reminder, there is an RSS feed of the latest country file announcements: https://www.country-files.com/feed/ Here are the release notes: 25 March 2025 (CTY-3509) VER20250325, Version entity is Amsterdam & St. Paul Is., FT/z Added/changed Entities/Prefixes/Callsigns: * GB1PAT, GB2PAT, GB5EA, GB5PAT, GB6SPD, GB9SPD and GB9VED are all Northern Ireland, GI * GB2AAW, GB5AAW, GB6AAW and GB9AAW are all Scotland, GM * GB0AAW and GB2WAA are both Wales, GW * IQ0SS/P is Sardinia, IS * K0VSH and W0ERJ are both United States, K in CQ zone 4, ITU zone 8 * KK4PEQ is Hawaii, KH6 * KF7HGP, KF7HGR, KN6NFQ and KT5Z are all Alaska, KL * K4W and KM4DNE are both Puerto Rico, KP4 * LU1UG/U and LU3AJL/D are both Argentina, LU * R2014RK, R8XF/1 and UA9XL/P are all European Russia, UA * R4HY/8 is Asiatic Russia, UA9 * RV7B/9 is Asiatic Russia, UA9 in ITU zone 20 * VK4YQS is Lord Howe Island, VK9L Removed Entities/Prefixes/Callsigns: * CO7WT/6Y in Jamaica, 6Y * FT4YM/P, IA0/IZ1KHY and IZ1KHY/IA0 in Antarctica, CE9 * AM64KZ and EA5EZ/P in Spain, EA * TX7MAS and TX7N in Marquesas Islands, FO/m * GB8WWA in Northern Ireland, GI * GB200LB, GB2KW, GB4WWA and M0EDQ in Scotland, GM * GB6WWA and GB9KW in Wales, GW * IR0WWA in Sardinia, IS * W9SSS and WB9AUV in United States, K * K5ZYO, N6DXW and WA8JQP in Hawaii, KH6 * KD2DRT, KJ7VDI and KK7UFN in Alaska, KL * W4I in Puerto Rico, KP4 * LU1DTI/D in Argentina, LU * SV1GA/A in Mount Athos, SV/a * R100GL, R1IE/1, R900BL, R900DM, R900DV and R900RO in European Russia, UA * R4DB/8, RC25BA, RK4PA/9, RV1CC/0 and RW6MD/0 in Asiatic Russia, UA9 Though I am subscribed to this reflector so that I can make these announcements, I do not see most messages posted to it. If you have any comments or corrections to the country file, please contact me directly. 73 - Jim AD1C -- Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://ad1c.us

I setup a computer to try and run 2 separate radios with different soundcards but the same software. I setup different users for each radio. I have a 746pro and a 7300. The 7300 works fine. The 746 with a Digirig mobile is not working with pwvucontrol on Mint 22.1 and pipewire audio Recieve audio is full on all the time. Alsamixer doesn't help. I have tried to turn off the unused card in each login. How can I make the 7300 work as one login and the 746 as the other? N0QJA

Hello All, I'm a brand new member of linuxham. I'm a Linux "user", not really an admin of any kind. I have been running the FLDigi suite under Linux on a Raspberry Pi for several years. I was using an old image that was given to me. It was perfectly functional until it wasn't. So I recently rebuilt the system from scratch using Steve Magnuson's method 1 (RPi Imager). https://github.com/NexusDR-X/nexus-bootstrap/wiki (This procedure uses 32-bit Bullseye). It took a while on my RPi 4, but it all seemed to go correctly. But this installation script has not been updated in years and Steve has left the building. So I am concerned that this old script may be building a system that is not compatible with newer versions of the FLDigi suite programs. Is there anyone who can inspect my scripts and see if they contain incorrect syntax? I would be eternally grateful for any guidance. During testing, I noticed the following: The system boots and runs normally. Using the menu buttons, Fldigi starts and works perfectly; I am able to send FSQ and MT63. Flmsg starts and runs perfectly. I am able to send a message using MT63. FLAMP will not start. When I click the FLAMP menu option, nothing happens. If I try to run the FLAMP (right radio) script from usr/share/applications directory, nothing happens. Here is the script: [Desktop Entry] Name=flamp (right radio) GenericName=Amateur Multicast Protocol Client/Server Comment=Amateur Radio Communications Exec=flamp -ti "Flamp (right radio)" --config-dir $HOME/.nbems-right --xmlrpc-server-port 7363 Icon=flamp Terminal=false Type=Application Categories=HamRadio; Also, if I run FLAMP from the terminal command line: flamp -ti "Flamp (right radio)" --config-dir $HOME/.nbems-right --xmlrpc-server-port 7363 Then FLAMP will start but will display "NOT CONNECTED". I tried changing the port to 7362 and restarting FLAMP, it started but still did not connect. Here is the FLMsg desktop script: [Desktop Entry] Name=Fldigi (right radio) GenericName=Amateur Radio Digital Modem Comment=Amateur Radio Sound Card Communications Exec=sh -c '/usr/bin/trim-fldigi-log.sh "yesterday"; fldigi --config-dir /home/pi/.fldigi-right -title "Fldigi (right radio)" --flmsg-dir /home/pi/.nbems-right' Icon=fldigi Terminal=false Type=Application Categories=HamRadio; Is this a known problem? Or should I be digging deeper? Thanks for any guidance. 73. Chris Doutre KC9AD

Hello, I'm in the process of setting my shack back up and want to use Linux. Years ago I used a singalink USB and cat cable that runs to an Edgeport USB converter to connect to my pc. This worked fine in Windows, but i'm not sure how to get everything talking in Linux. I've tried searching for a "get started" guide but i'm not having any luck / a bit out of my depth here. Can anyone recommend a good tutorial to set up an FT-950 in linux to use rig control and digital modes? Any helpful tips appreciated! Joe - KC9LFP

Hi. Running on LMDE 6 all up-to-date, on a 4 core Intel platform with 8G of RAM. Fldigi 4.2.06.21 (alpha) has a buggy AFC feature. It's been flaky since I first tried it, but intermittently the control (lower right, under the T/R button) would be "Greyed Out" so unable to change it's state. The "greyed out" LED sort of indicates AFC is disabled, but in truth it is enabled and causes problems with noisy MFSK signals, where it can wander off to a neighbouring QRM signal. Restarting Fldigi used to (most, but not all times) fix it, but now the control is permanently disabled, but the behind GUI AFC functionality is still running, and I'm unable to turn that off.. ver4.2.06 (release.) It's AFC seems to mostly work as "normal". With no changes to the perfs files. That is, as configured, they both use the same files in the default location just fine, but the .21 Alpha version is very confused about if it has an enabled AFC control, or not. Plus as above, when the on/off control is disabled, the AFC functionality is running! Everything else seems OK, as far as what I've used anyway. Though the logic of what modes allow the AFC to be used, I haven't fathomed yet. I can only conclude the AFC On/Off control Enable/Disable in 4.2.06.21 is buggy, so have reverted to the release version. 73. Dave G0WBX.

Hi All, I have a question on FL Digi on a Mac. I had an older MacBook Pro with an Intel processor. I just bought a new MacBook Air with the M3 processor. I am having problems getting FLDigi to work on it. I gave the Mac permission to run the program and permission to use microphone. I downloaded and installed FL Digi 4.2.06 . When it comes up, it asked for permission several times and keeps on ending the program. Is it the M3 processor or is it something I should change on the Mac? I hope somebody has an answer to this. Thank you, Pat AB3IK

The Country (CTY) Files were updated on 12 March 2025: https://www.country-files.com/cty-3508-12-march-2025/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse over the word Contest in the menu, then select the software you are using. To install the file, follow the link to your software at the top of the page. If you are interested in a bigger CTY.DAT for everyday logging, you can get it here: https://www.country-files.com/big-cty-12-march-2025/ Note that the release notes (and Version Entity) for this larger file are different than what is shown below. There is a separate link to them. As a reminder, there is an RSS feed of the latest country file announcements: https://www.country-files.com/feed/ Here are the release notes: 12 March 2025 (CTY-3508) VER20250312, Version entity is Bangladesh, S2 Added/changed Entities/Prefixes/Callsigns: * EG60GURU is Spain, EA * TO1Q is Guadeloupe, FG * TX9A is Austral Islands, FO/a * FO/F4LYI is Marquesas Islands, FO/m * GS4WAB/P is Scotland, GM * KT4XL is United States, K in CQ zone 4, ITU zone 8 * NS9I is United States, K in CQ zone 5, ITU zone 8 * K6JPB and KZ7MFL are both Alaska, KL * LU9DCA/D is Argentina, LU * RA0QK/8 is Asiatic Russia, UA9 Removed Entities/Prefixes/Callsigns: * EA2EZ/P in Spain, EA * TX7W in Austral Islands, FO/a * TX100REF and TX7WW in Marquesas Islands, FO/m * KJ5APX in Hawaii, KH6 * R9FCS/4 and R9JQ/6 in European Russia, UA * RT2F/P in Kaliningrad, UA2 Though I am subscribed to this reflector so that I can make these announcements, I do not see most messages posted to it. If you have any comments or corrections to the country file, please contact me directly. 73 - Jim AD1C -- Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://ad1c.us

Hi, I'm playing with this and, at first look, IC-7760 seems compatible with IC-7610 handling, so for any brave souls here is a patch to test: https://ixion.pld-linux.org/~arekm/flrig-IC7660-alpha.patch To be applied on top of git://git.code.sf.net/p/fldigi/flrig pu/df branch. ps. power levels are interpolated, so could incorrectly reflect real power -- Arkadiusz Mi?kiewicz, arekm / ( maven.pl | pld-linux.org )

This is a problem that has been bugging me for sometime. I finally decided to look into it. I am running an IC-7300 and connecting to it with flrig. Most times I change my operating from CW to FT8 the filter bandwidth remains at 500 Hz. I am using WSJT-X to effect the switch. I have found the trace where WSJT-X is requesting the mode change and can see the XML and CAT interfaces. In the section below I see 4 CI-V transactions: at 681 ms - On selected VFO, set USB-D, filter 1. at 684 ms - Set bandwidth 9 - which I assume is what is setting it to 500 Hz (0 is 50 Hz, 40 is 3600 Hz). at 686 and 689 ms - these are setting default Twin PBT settings. Should we keep the bandwidth when we change modes or just keep the selected filter or even select the default filter for that mode? 73 Phil GM3ZZA 14:52:21.680 : readRequest: <?xml version="1.0"?> <?clientid="hamlib(24283)"?> <methodCall><methodName>rig.set_modeA</methodName> <params><param><value>USB-D</value></param></params></methodCall> 14:52:21.681 : WriteBuffer: FE FE 94 E0 26 00 01 01 01 FD 14:52:21.683 : 1: ReadEcho [2.13 msec] (10): FE FE 94 E0 26 00 01 01 01 FD 14:52:21.684 : ReadBuffer [3.254000 msec]: FE FE E0 94 FB FD 14:52:21.684 : WriteBuffer: FE FE 94 E0 1A 03 09 FD 14:52:21.686 : 1: ReadEcho [2.13 msec] (14): FE FE 94 E0 1A 03 09 FD FE FE E0 94 FB FD 14:52:21.686 : ReadBuffer [2.175000 msec]: FE FE E0 94 FB FD 14:52:21.686 : WriteBuffer: FE FE 94 E0 14 07 01 28 FD 14:52:21.688 : 1: ReadEcho [2.12 msec] (9): FE FE 94 E0 14 07 01 28 FD 14:52:21.689 : ReadBuffer [3.224000 msec]: FE FE E0 94 FB FD 14:52:21.689 : WriteBuffer: FE FE 94 E0 14 08 01 28 FD 14:52:21.692 : 1: ReadEcho [2.12 msec] (15): FE FE 94 E0 14 08 01 28 FD FE FE E0 94 FB FD 14:52:21.692 : ReadBuffer [2.161000 msec]: FE FE E0 94 FB FD 14:52:21.692 : writeResponse: HTTP/1.1 200 OK Server: XMLRPC++ 0.8 Content-Type: text/xml Content-length: 120 <?xml version="1.0"?> <methodResponse><params><param> <value><i4>1</i4></value> </param></params></methodResponse>

The Country (CTY) Files were updated on 07 March 2025: https://www.country-files.com/cty-3507-07-march-2025/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse over the word Contest in the menu, then select the software you are using. To install the file, follow the link to your software at the top of the page. If you are interested in a bigger CTY.DAT for everyday logging, you can get it here: https://www.country-files.com/big-cty-07-march-2025/ Note that the release notes (and Version Entity) for this larger file are different than what is shown below. There is a separate link to them. As a reminder, there is an RSS feed of the latest country file announcements: https://www.country-files.com/feed/ Here are the release notes: 7 March 2025 (CTY-3507) VER20250307, Version entity is Israel, 4X Added/changed Entities/Prefixes/Callsigns: * AO8M is Spain, EA * GB1KBR is Scotland, GM * HJ4ADR/0 is San Andres & Providencia, HK0/a * 7N3CNW/JD1 is Minami Torishima, JD/m * K0NW, K0SB, K2MMT, KC9EI, KL7KWA and W9KNI are all United States, K in CQ zone 3, ITU zone 6 * KA4RUR, KA9OMY, KD9S, KF9MT, N3LHQ, N9JNQ, W3GW, W7JR and W9UUM are all United States, K in CQ zone 4, ITU zone 7 * AC4ZH, AF4AI, K0EMT, K4NH, K4YUC, K5XQ, KC4IR, KE4QCY, KO4EVC, N4BCD, W1HRB, W5BAM and WA4CDP are all United States, K in CQ zone 4, ITU zone 8 * K9EE, K9GMM, KK9TT, KN0A, N5HF, W8CS, W8NUD, WA5T and WB6RAB are all United States, K in CQ zone 5, ITU zone 8 * KC0QZS is Hawaii, KH6 * AI1L and KC7CRS are both Alaska, KL * R108M and R25BLIN are both European Russia, UA * UB8M/1 is European Russia, UA in ITU zone 19 * RL1I/P is European Russia, UA in CQ zone 17, ITU zone 20 Removed Entities/Prefixes/Callsigns: * KC4USC in Antarctica, CE9 * GB1RB in Scotland, GM * AE5MI, AG4P, AI5A, K0MP, K0UM, K4CWW, K4LEN, K4TO, K5IJ, K7KMM, K7TRT, K9RK, KA4GAV, KA8NJW, KB8NUF, KC4NX, KD9OFG, KE8TEH, KG5UN, KI4ZRH, KI5GX, KM4ECH, KN4CG, KN4SLP, KN4VKW, KT3R, KT4XL, KW5DRE, N0EUV, N0MH, N0ZO, N4JKO, N4SEV, N6GR, N7ML, N8KDX, N9FDE, ND6K, NR9Q, W0FLZ, W0NF, W0RSJ, W3HDH, W4IPA, W4JGD, W4MRF, W4YTO, W4ZHA, W7GKF, W8TMT, W9PL, WA0YPC, WA1TYB, WA2SWX, WA9DDK, WB4KUU, WC2A, WF8D and WV8HAT in United States, K * W3OGG in Hawaii, KH6 * KE6DFY in Alaska, KL * K9P and KM4GAU in Puerto Rico, KP4 * UE82M and UE82ML in European Russia, UA * UA9AR/P in Asiatic Russia, UA9 * VK4MUD/7 in Australia, VK Though I am subscribed to this reflector so that I can make these announcements, I do not see most messages posted to it. If you have any comments or corrections to the country file, please contact me directly. 73 - Jim AD1C -- Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://ad1c.us

Hello dear OMs, I have added the THOR32, THOR44 and THOR56 modes to the Android AndFlmsg application. It should also now install without complaining on 64bit ARM and 64bit X64 devices with the "latish" Android versions. The download directory is at https://bitbucket.org/VK2ETA/andflmsg/downloads/ The public GIT repository access is at https://bitbucket.org/VK2ETA/andflmsg/src/master/ All the best. 73, John (VK2ETA)

The Country (CTY) Files were updated on 28 February 2025: https://www.country-files.com/cty-3506-28-february-2025/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse over the word Contest in the menu, then select the software you are using. To install the file, follow the link to your software at the top of the page. If you are interested in a bigger CTY.DAT for everyday logging, you can get it here: https://www.country-files.com/big-cty-28-february-2025/ Note that the release notes (and Version Entity) for this larger file are different than what is shown below. There is a separate link to them. As a reminder, there is an RSS feed of the latest country file announcements: https://www.country-files.com/feed/ Here are the release notes: 28 February 2025 (CTY-3506) VER20250228, Version entity is Tajikistan, EY Added/changed Entities/Prefixes/Callsigns: * IT9ECY/CH is Sicily, *IT9 * EA8JR and EA9ADD are both Spain, EA * TX7XG is French Polynesia, FO * GB0GGR, GB5AG and GB5CC are all Scotland, GM * IZ3QBN/CRT is Italy, I * K1AY is United States, K in CQ zone 4, ITU zone 8 * NA1M is Mariana Islands, KH0 * KI6BGQ, N6URO, N6UYY and N8YCF are all Hawaii, KH6 * AG6PI and NA9Z are both Alaska, KL * LU1VOF/D, LU2DT/D, LU4DPL/H, LU5DLH/D, LU5DTF/D, LU6UVI/D, LU7ETZ/D, LU7EYX/D, LU8DBB/D, LU9DEW/D, LU9EI/D, LW2DJG/D, LW2DMS/D, LW2EAS/D, LW2EDL/D, LW6DR/D and LW6EGE/D are all Argentina, LU * LU1VJK/V, LU1VNH/V, LU1XMO/XA, LU3WFJ/XA, LU8XW/XP and LU9WT/XA are all Argentina, LU in ITU zone 16 * UB0IBA/7 is European Russia, UA * R8AIM/0 is in ITU zone 23, not ITU zone 30 * R85DPSH is Asiatic Russia, UA9 * UB9MCW/P is Asiatic Russia, UA9 in CQ zone 18, ITU zone 32 * R4FBJ/0 is Asiatic Russia, UA9 in CQ zone 19, ITU zone 23 Removed Entities/Prefixes/Callsigns: * EM1EHR in Antarctica, CE9 * TO0J in French Guiana, FY * AC1RU, K9ROB, KC5CZC, KE6KVE and KK4REY in Alaska, KL * K6VH in Puerto Rico, KP4 * R2025NY, R8FF/P, R9JAB/6/P, RK25NY, RN25NY, RT25NY, RW25NY, RX25NY, UA4FMQ/P, UA9SY/4 and UE25NY in European Russia, UA * RA0QK/8, RA8CP/P, RC1BM/P, RC5B/8, RO25NY and RU25NY in Asiatic Russia, UA9 * ZS85VDAM in South Africa, ZS Though I am subscribed to this reflector so that I can make these announcements, I do not see most messages posted to it. If you have any comments or corrections to the country file, please contact me directly. 73 - Jim AD1C -- Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://ad1c.us