开云体育

FTDx10 and Raspberry Pi and Pulse and FLRig

Richard Jackson, KD8NOA All Messages By This Member #54252 I am slightly embarrassed to bring this up, I thought I knew how to do this, but I'm stuck.?? ? I have a Win 11 laptop, I downloaded the windows drivers from Yaesu, connected to the radio, FLRig immediately worked.?? ? I have a Raspberry Pi running bookworm.? I switched it from Pipeline to Pulse and from Wayland to X11.? lsusb shows the Silicon Laps CP2105 Dual UART Bridge.? When I open Pulse, it shows PCM2903C Audio CODEC but it does not show any USB drivers.? When I try FLRIG config FTDX10, click update then select ? "/dev/serial/by-id/usb-Silicon_Labs_CP2105_Dual_USB_to_UART_Bridge_Controller_01829563-if00-port0", ? baud=38400 and 1 stop bit, and click Init, I get "Transceiver not responding".? If I try the other port: ? "/dev/serial/by-id/usb-Silicon_Labs_CP2105_Dual_USB_to_UART_Bridge_Controller_01829563-if01-port0" ? ... I get the same thing.? I tried to search for a solution and did not find anything. I have two more RP with identical config running a Yaesu FT710 and a Yaesu FT897.? Both are excellent, no issues.? All suggestions are welcome!
Richard Jackson, KD8NOA All Messages By This Member #54253 Well that was helpful, thanks everyone!? FLRig just started to work.? I have no any idea why.? ? I'm still stuck on the USB port in Pulse.? Is there something I have to do in Pi to cause it to reinitialize its IO configuration?
Glenn Jensen, WA6BJQ All Messages By This Member #54254 开云体育 Not sure… had zero issues with the FTdx10 on the Raspberry 5 – just need to make sure you have your user in the *dialout* group… typical stuff. If you don’t change your port connections the USB device names should remain the same (and you may wish to explore creating some udev rules to make it super simple to identify – two examples included). ? 73’蝉 ? ? Glenn WA6BJQ ? ? ? From: [email protected] <[email protected]> on behalf of Richard Jackson, KD8NOA via groups.io <richard7298@...> Date: Thursday, March 13, 2025 at 12:21?PM To: [email protected] <[email protected]> Subject: Re: [linuxham] FTDx10 and Raspberry Pi and Pulse and FLRig Well that was helpful, thanks everyone!? FLRig just started to work.? I have no any idea why.? ? I'm still stuck on the USB port in Pulse.? Is there something I have to do in Pi to cause it to reinitialize its IO configuration? 95-ham-rig.rules 95-ham-rig.rules 99-yaesupport.rules 99-yaesupport.rules
Glenn Jensen, WA6BJQ All Messages By This Member #54256 开云体育础诲谤颈补苍…. Good point.. however, to get to the embedded audio device, the USB connectivity needs to be fully functional (that may be the reason some assume that SiLAB is required). ? 73’蝉 Glenn WA6BJQ ? From: [email protected] <[email protected]> on behalf of Adrian Fewster, VK4TUX via groups.io <vk4tux@...> Date: Thursday, March 13, 2025 at 12:39?PM To: [email protected] <[email protected]> Subject: Re: [linuxham] FTDx10 and Raspberry Pi and Pulse and FLRig The silab drivers have nothing to do with the usb audio.? In windows a microsoft driver is used for usb audio on that same connection, and the silab driver just does the uart-usb comports. Same in linux, an alternate driver is used for usb audio. It is a common misunderstanding and assumption. ? 73 ? vk4tux toggle quoted message Show quoted text On 14/3/25 05:16, Richard Jackson, KD8NOA via groups.io wrote: I am slightly embarrassed to bring this up, I thought I knew how to do this, but I'm stuck.?? ? I have a Win 11 laptop, I downloaded the windows drivers from Yaesu, connected to the radio, FLRig immediately worked.?? ? I have a Raspberry Pi running bookworm.? I switched it from Pipeline to Pulse and from Wayland to X11.? lsusb shows the Silicon Laps CP2105 Dual UART Bridge.? When I open Pulse, it shows PCM2903C Audio CODEC but it does not show any USB drivers.? When I try FLRIG config FTDX10, click update then select ? "/dev/serial/by-id/usb-Silicon_Labs_CP2105_Dual_USB_to_UART_Bridge_Controller_01829563-if00-port0", ? baud=38400 and 1 stop bit, and click Init, I get "Transceiver not responding".? If I try the other port: ? "/dev/serial/by-id/usb-Silicon_Labs_CP2105_Dual_USB_to_UART_Bridge_Controller_01829563-if01-port0" ? ... I get the same thing.? I tried to search for a solution and did not find anything. I have two more RP with identical config running a Yaesu FT710 and a Yaesu FT897.? Both are excellent, no issues.? All suggestions are welcome!
Richard Jackson, KD8NOA All Messages By This Member #54276 About the CAT interface and FLRIG ... I used the same settings that I use on my other two RP and I just kept trying to use interface: ? /dev/serial/by-id/usb-Silicon_Labs_CP2105_Dual_USB_to_UART_Bridge_Controller_01829563-if00-port0 ? and eventually it worked.? I did not do anything different, I just kept trying and the last time, it worked.? I have no idea why it failed to work for 10 or 20 tries then worked on try 21.? There were numerous reboots during that time, I don't get it.?? ? About the audio interface ... I have an FT710 and FT897.? Both have been running for months and are current on updates/upgrades.? All three RPs are running the same OS, pulse, and FLDIGI FLAMP and FLMSG versions.? In FLDIGI the RPs on the 710 and 897 use interface? ? ? Note the "USB Audio Device".? That category does not display in pulse on my third RP.? On that machine, I get this: ? ? There is nothing about USB Audio Device.? It works and I am satisfied with that but it is different for some reason that I have not found.?? ? Thanks for the advice.? I will review the other information and I may take some of your suggestions :)

Previous Topic Next Topic