开云体育

John, Not knowing the 3000 could it be that at some point you assigned different antenna jacks to different VFOs? Normally the "use xcvr data" box is unchecked, but all the others are checked so the

Hi Cliff, Thanks for the reply, yes I have tried that and the 2 files attached on a previous post are the results of those tests with all boxes checked and all boxes unchecked Thanks John

There could be a bug in flrig, but before we assume that try a few things. 1. In the flrig configuration go to the Restore page. Try checking all the boxes including "Use xcvr data" then close flrig.

I have been looking at other problems, and this message always misleads me. I immediately think that it's been refused becaused of e.g. an authentication error. It's "acrtively" refused - to me that

On the Pi check that port 4532 is open.? "Actively refused" may mean that the server (in this case, the pi) is not accepting inbound connections on the port.? You will also want to be sure, on the

Can anyone help please, it seems to set the antennas when it switches between VFO A and B which it does each time it starts up and shuts down. It is a remote system, and I have no means of seeing

It does, John..... Increasing the automation does require more 'juice' - causing me to justify the upgrades to my compute / storage / networking environments. Today - I am using an older HP G1 small

Great work! Thank you. I think the free CQRLOG has this ability already included? Seems to be what I currently use. 73, John

Duff, Likely not a bug, Linux/Windows uses a different line terminators. Thou it shouldn't matter. The file you received from the windows machine place it in FLDIGI for transmission and created a

FWIW, I have made three shell scripts that log to LoTW, Club Log and eQSL.cc? Gridtracker did the job for me before, but when I was about to use a Rock 4SE the juice was not enough to run both

Guys, Reaching out again - to see if anyone has gotten FLDigi to connect / transfer log data into CloudLog... Thanks in advance, Glenn WA6BJQ

When I load up a relay file originating from a windows machine in my Linux machine, it is not encoded properly. I have to run the file through the dos2unix command before I transmit it. Is this

Further testing shows that whenever I start or stop flrig, as it opens or closes the radio ant relays click and the radio momentarily switches over to vfo B and the tuner is momentarily enabled. I

I have installed flrig 2.0.05 on a pi4 running bookworm, it behaves strangely when opening and closing it down. I have tried all combinations on the restore tab. It switches the antenna inputs on all

"Keith, G6NHU via groups.io" <g6nhu@...> wrote: Apple are making it more and more difficult to run unsigned applications on MacOS, whether there is a long-term fix that doesn't involve

Thanks Peter, I just drilled into the .app itself, found the executable and made an alias. Running that opens a terminal window and then fldigi so I think I’m sorted. Obviously I have no idea behind

Keith, I think this thread gives a workaround: /g/linuxham/topic/macos_14_5_fldigi_4_2_05/106887484 I created an automator fldigi.app to invoke

Hi Keith, I just remembered there was a little more to it. I have the actual fldigi executable file that I copied from the app bundle in my home folder. See this message for some related information:

I have posted this on the Log4om forum but as of yet got no help, so am trying here now. I have flrig installed on a raspberry pi running bookworm. Also installed is wsjtx. They work great together

Hi Dan, Sadly not - I’ve just tried running it from my home folder, from my pictures folder, from my music folder and about half a dozen other locations, all with the same problem. 73 Keith