开云体育

I assume I can use the Z100 Plus and the Yaesu FT 818 together but I need to put the radio and in CW, key down and hit the TUNE button? Jim? N9EET

I'm comparing the Z-11 PRO II vs the AT-100 PRO II. ?My primary question is regarding the 0.1-125 watt rating of the Z-11 vs. the 1 to 125 watt rating of the AT-100. (I realize that the AT-100 can

I don't mean to stray too far from the original topic of this thread, but I have a related question.? I own a FT-DX10 and also have an old LDG YT-1200 which was oroginally designed to interoperate

I use my FTDX10 with the LDG remote auto-tuner. I would like the "tune" button on the radio to trigger a low power CW signal to trigger the remote tuner to tune. Unlike conventional auto tuners

I learned today after having great talk with LDG representative, that such cable is only needed by 100 model. 200 and 600 Pro II does need it. I verified and it auto tunes. I was told that you need to

Thank you N0YWB I noticed in your screen "as viewed from rear panel" of the FTDX10. I want to be extra clear. The DIN connector is when looking INTO the LINEAR connector in the back the radio. 73,

An LDG is a well-made top grade tuner. No other brand or model can do better. I don't know anything about your equipment or set-up, but I had a surprising-to-me experience with a different used LDG

Hello Guys, I am trying to make this cable between both units since it is on long backorder. I got all the parts. So few things: 1. Looks like Y-ACC-2 CABLE.PDF downloaded here from file LDG Cables

Bookend that with another it-100 :) (under nerf dart) kelly

I have a very similar setup (rig, ALS-1306, LDG-AT1000). I have a couple tips for you. 1) Turn off autotune on the tuner. Otherwise, it will try to tune at inopportune times. This means you need to

Well, sorry your 1000 isn't working for you. I have both the 1000 and the 600. My 600 is used with my ALS-600 amp. It does a great job matching my inverted L antenna on most bands (40-10). Sometimes I

The FT-DX10 has a buuilt-in antenna tuning unit with a 16.5 to 150 ohm matching capability. The Z-11ProII has the same power rating but can handle a wider range of 6 to 1000 ohms. Make sure the

With such a tight SWR requirement you would probably be better off with a manual tuner. LDG will be happy with matches that give 1.5 or better towards the amp so you would have to tweak things at

I can't seem to find much.. actually none... activity regarding the LDG-1000.? I bought it used about 8 yrs. ago and have never really used it since then.? Not knowing a whole lot about tuners, Ive

from the manual hope this helps Dave Garber VE3WEJ / VE3IE

http://www.radiopics.com/1.%20Manuals/LDG/LDG_Electronics%20RT-11%20(Manual).pdf

Does anyone have the tuning range ( in OHMs) of the rt-11 Tuner? Thanks in advance & 73 Dean K2WW

Hi Al nice idea but the complexity is due to the antenna MATRIX switch (WX0B design)... since it is a matrix (2x6) would need to have two sets and? system would need know which which one to use to

It’s got both.