开云体育

Are you using a lightening arrestor? I had same problem until I took it out. Paul Sobon 1700 Bassett Street, #1904 Denver, CO 80202

I’m seeing the amp with a extremely high ?vswr reading in standby ?and the tuner is low I just put the amp in operate and vswr resets when I xmit.?Can’t clear in standby mode. Why does amp vswr

Hi i am having the same problem driving the amp with 30watts the hf auto tuner is saying 1.4 but the amp is all over the place spiking at 9.9 the going to standby mode im trying to run my station

After my Amplifier SWR increases anytime (just a few tenths)the SWR will not decrease by itself . Cycling the amplifier on and off resets SWR back to 1.2 or less and it stays put but never decreases .

Are any members using the amplifier for MARS-ALE operation?? I would be interested in communicating off -line to learn of your experience. Thanks, Mike AAR6TF Army MARS

I recently upgraded the firmware and everything seemed to be ok - the screen dislpayedthe 1_05b.? When I turned on the amplifer this morning, I did not get the menu screen and only had a grey

Thanks but I don't have the loader file. Paul

I may have 1.04C, I will let you know when I get home. Email me at w3kit at Yahoo dot com ( w3kit@... ) so I will have your. Often i see their software developer and hardware were out of

Does anybody have a previous firmware file, with the loader program? I bought my LA1K used and this would be the first firmware update I will be doing on this. I tried contacting Palstar by email, but

I followed the instructions from this video and successfully installed the firmware for my LA-1K. I vaguely remember the process but I think I pointed it to the “txt” file. Anyway, the video

Thanks. I'll do the same. The feedback was also intended for Palstar to mitigate everything that is wrong with what I found (or didn't find in this case). To: "la1k" <[email protected]> Sent:

It is incomplete. It actually looks like a folder from something all together different however I used the loading program (folder) from an earlier update and used the new 1.05B txt file as the

I found the zip file for the 1.03H version I already have installed and see the LOAD_LA-1K.exe file is in there so I think this 1.05B firmware zip file is incomplete.

I've never updated firmware before so this is from a noob's perspective. The user manual I have (copyright 2018 no publish date or version) has instructions about updating firmware on page

Exact same issue within 1 week of arrival - output now is max 300-400 watts - never overdriven.? I have found Paul to be extremely helpful in?my testing; today shipped back FEDEX and he offered to

First thing I would do is put an SWR meter between the amp and tuner. See if the meter agrees with the 2.5:1 SWR. Danny K5CG To: "la1k" <[email protected]> Sent: Sunday, May 5, 2019 12:57:17 PM

Hello, Lately I've noticed the bypass SWR fault on 40 mtrs ssb.? I do not have the fault on any other band or mode, including 40 mtr cw.? Also, when transmitting 40 mtr ssb into a dummy load, the

Yes, however, if you use the companion 04AT tuner, you have provision for four antennas plus other useful features.? DXE tells me that the A1200S and 04AT are in stock for immediate shipment and are

Looks like you can post to me. *From:* [email protected] <[email protected]> *On Behalf Of * la1k@... *Sent:* Saturday, April 27, 2019 8:31 PM *To:* [email protected] *Subject:* [la1k] Won't

Well it's been a couple weeks and I have been waiting to be able to post, but I guess they are just not going to let me. Might as well go if I can't participate?