开云体育

You may be the exception. In my 30 yrs or so of hamming I have seen things. One guy had the SX-77?? It’s an amp using 2 8877 tubes capable of producing 3000 watts. Built a crappy antenna that

Hi Hiram, I use my Elecraft KX2 as a QRP exciter to operate on 5346.5 kHz USB with my Elecraft KPA1500 set to Band 5; staying well within the permissible 100W PEP ERP limit.? The built-in ATU of my

Since we are on this topic, 30M is limited to 200w so an amplifier isn’t helping u much there either. Didn’t read all the replies but it seems to me people want to use an amp on frequencies that

After sharing my concerns with Mark Ward (Palstar's technician) about the way *lack of 60M and 30M BAND Selection Buttons* , clearly made available on the current LA-1K touch-screen display, would put

not understanding why one would use an amp on 60M when ERP is limited to 100W Sent from Outlook<http://aka.ms/weboutlook> ________________________________ Sent: Friday, May 26, 2023 8:03 PM To:

Lets end this nonsense now. FCC. regs state max power use on the 30 meter band 200watts P.E.P. 60 meters 100 watts Max. Any questions.

Your answers could be answered with a call to Palstar, assuming they dont have your number blocked. N5GGG

Apologize for the rhetorical questions; answers to those questions should become apparent when you consider their claims, as seen near the top of the company's LA-1K page

Hello All, The FCC ID on the back of my LA-1K reads 2ANZ2-LA-1K.? Did a FCC ID search for 2ANZ2-LA-1K on FCC.gov and was able to find the LA-1K EMC test report (Report No.: 100620-8) as submitted to

Not being snarky here... Install Windows 10 on your windows 11 machine.?? 11 has more bugs than a Central American jungle.

Anyone else having problems running this latest firmware on a Windows 11 machine? I get error message: LOAD_LA-1K.exe "The application was unable to start correctly (0x000007b)." I tried running as

I understand that the DB7i? is the band data cable to use with the IC-7100 and that the Icom OPC599 Y cable? is also needed? (in order to adapt the 13 pin connector on the rig with the 7 pin one on

Depends on your country.? In the US, the max is 100W PEP ERP.? If you are using a 1/4 wave vertical, and a 100W RIG, you could not achieve 100W ERP without an amp. FWIW, mine works fine on 60m, just

What HF band is shown just above the "BAND" button on the LA-1K touch-screen display, when your LA-1K is on *STBY* mode and is being direct-cabled to your 60M-selected operating transceiver,

Steve, What is Antenna 2 plugged into? What is Antenna 1 plugged into? Are you using RF sensing or Direct Cable? I use a 60m antenna on Antenna 1 and have no issues here direct cable

I have moved my wire antenna to Ant 2, now 60m is going to my wire.? When I had it on Ant 1 if I turned off the Amp it worked.? I do not understand why it seems to default to Ant 2 for 60m?? Thank

Everyone keeps saying 60 does not work on the LA-1K. It absolutely does on mine. I just now hooked up the load resistor and tried it. CW 43 watts in gives me 1002 out. 73 Bob WB8CAC

Please find below an excerpt (highlighted *in b* *old/italic text* for clarity ) from 47 CFR Part 97 (up to date as of 5/04/2023), page 45 of 52, for your consideration, Dennis. * *( i ) No station

Steve, I understand your frustration with the latest replies. I am not sure if you want to use Ant 1 or Ant 2 in the situation you described. Assuming you want Ant 2, If the amp is turned on, (which

I would suggest that this thread has nothing to do with that! But reading is no longer a requirement. I give up on a meaningful response! You all enjoy assuming I am trying to hack my palstar to work