开云体育

That's an awesome resource! I knew there was someone like yourself that had already done the work, so thanks for sharing. Best Regards, David Campeau ki4dra

David, You are on the right track. The info on my website might help clarify the differences of the two modes of operation. https://qsk2500.myfreesites.net/la-1k-qsk 73 .... Bill K3HZP

"*what exactly is the difference in performance between the 8 pin mini Din to RCA and the Band Switching Cable*?" I do not know the exact differences in performance/delay as some of this does go

David, Thank you for your clear explanation.? I ordered the 8 pin mini Din to RCA interface cable you mentioned.? At least I will have one more type of backup. I do have another question...what

I was thinking about what I wrote, and thought.... Boy I absolutely love my FTDX10, what a great radio, but what a PITA to get working with an AMP and or trans match. lol The RCA PTT I was referring

The only required connections are --? RF In and RF Out and PTT (Push to Talk). What the above is saying, besides your RF IN/OUT you are only required to have a PTT.?? You can see at the bottom of

David, I do not even have a PTT cable installed.? Are you saying the Yaesu FT DX-10 to the Palstar LA-1K Amplifier requires an additional PTT Cable? Or, are you saying the Yaesu FT DX-10 to the

Mine is now about 4 years old and came with both 120 and 240 Vac power cords (no switch). By the way, supplying BOTH cords is a very nice feature - THANKS, Palstar!! By comparison, the Mercury IIIs

Issue Resolved I replaced all the 50 ohm coax interconnect cables between my IC-7610, LA-1K and HF-Auto. When doing so I used different random cable lengths then the lengths I used before. Everything

Wuhan appears to be a Chinese company so that doesn't surprise me about Quality Control. ?However, if someone knows of a solder-less db9 of better quality let me know.?? I do solder, and have

David, Those are the exact two items I purchased from Amazon and Ebay.? Be warned though, one of the Anmbest 2PCS DB9 Solderless RS232 was faulty [pin 9 had a broken connection].

I'm happy to assemble and test the 4 cables, but have a question.? Is the cable I have experience assembling acceptable? *Below is the

David, That is super kind of you to offer to help me.? Thank you! Paul, the CEO at Palstar called me this morning.? He offered to send me their last cable for free.? It will ship tomorrow.? Now

The la-1k is RF sensing, and the only "required cable" is PTT.? I am a FTDX10 owner and just used PTT for the first few months.? The disadvantage I found to using PTT is the very slight delay for CW

This morning, when I powered on my LA-1K, all fans started running immediately, like as the internal temperature was over 63 degrees after quite a bit of operation. And they keep running at the

I need help making the cable that connects the Yaesu FT DX-10 to the Palstar LA-1K Amplifier. I have looked at posts by both Joe and K9TRX.USA@..., but still am confused. Joe uses the name: Yaesu

Like Barry said. Maybe the original PS ran out of stock. So i think Palstar should ? alert of this change with sirens and lights because errors can be made due to extensive literature ?regarding

Auto detect power supplies have been used in the medical industry for years. My LA 1K is three years old and has the automatic switching power supply I guess someone can call Palstar and tell you what

Both of you guys are right. There is no switch on older units (May, 2020 for mine) and just as Jerry said, two power cables came with the amp, one for 240 and one for 120. No clue when the change was

Should be on the left hand side 3/4th's of the way back. la-1k