The la-1k is RF sensing, and the only "required cable" is PTT.? I
am a FTDX10 owner and just used PTT for the first few months.? The
disadvantage I found to using PTT is the very slight delay for CW
over a cable, so I decided to make my own.
How about this deal, I'll just give you my cable.? Or I have
another Anmbest DB9 I will never use, so just mail me the cable
you bought off ebay, and I'll wire it, and mail it to you.? Your
choice.
David
toggle quoted message
Show quoted text
I need help making the cable that connects the Yaesu FT DX-10
to the Palstar LA-1K Amplifier.
I have looked at posts by both Joe and?K9TRX.USA@...,?but still am
confused.??
Joe uses the name: Yaesu Cable SCU-28.? Not sure what that
is...is it the same as the DXE-YSU-10PMD-UN Din plug?
Joe's wiring chart shows "Amp key in" for the Palstar side, but
no "Amp key in" is shown for the Yaesu side?
?
I already tried a cable I used with the Ebay version of the Din
plug, but no go.? I am convinced that either the new Palstar
LA-1K is faulty from the factory, or that somehow I have the pin
wires mis-wired.??
I finally received the DXE-YSU-10PMD-UN Din plug with wires in
the mail.? I still have another DB-9 YL-SMG-9DF left from the
Amazon order.
I am also wondering why I cannot post on the previous posts here
at groups.io?
Can someone help me please?
Also, I am beginning to feel more and more pissed off at
Palstar.? They sell a $4000 amplifier but do not offer a
pre-built cable to connect a Yaesu FT DX -10 to their LA-1K?? If
you look at Mercury Amps website, they offer just about every
cable for their amps.? The Ameritron 1306 cable that is suppose
to work with the LA-1K is out of order for months?
What the hell man?
Not a good way to run a company at all.
