开云体育

This is a place for temp files, other than administrative files. Either they are to be added to the next release, added to the Documents or will have a short life span. 开云体育 has free subscription storage limit of 1 GB! The following are counted towards the storage limits for the group: - Files - Photos - Images in databases - Images in wiki pages - Message attachments 1. Please put files into the correct folders. - If there is not an appropriate folder, feel free to create one. 2. If you are working on a problem and want to load info for others to look at, create a folder within the 'Problems Being Worked On' folder using the Msg number or you name as the folder name. When the problem is resolved please delete the folder. 3. All files and photos are subject to removal at the moderators discretion. Your Moderators -- Peter Ulvestad JMRI Users Group Moderator - http://www.jmri.org ( http://www.jmri.org ) Tam Valley Group Moderator - https://tamvalleydepot.com/ ( http://tamvalleydepot.com/ ) Sprog-DCC Group Moderator - http://www.sprog-dcc.co.uk/ ( http://www.sprog-dcc.co.uk/ ) Edmonton Model Railroad Association - http://www.emra.club/

====================== HOW to ask your question ====================== One of the most common questions about JMRI is "How do I get it to work?". This isn't really a problem with JMRI itself in most cases, but there are HUGE numbers of possible configurations for DCC systems, and Windows, Linux, and Mac computers out there. Just asking "How do I get it to work" is NOT going to get you any useful help. When asking ANY question, you should >>>utilize a meaningful subject line<<< that indicates the problem and include the following information in the body of the message: + If JMRI has started copy and paste the System Console into the body. (its under help on the start screen) + Has JMRI worked before on this computer? + JMRI version + Previous version if you just upgraded + Java version + Previous version if you just upgraded + Computer make and model + if you have just upgraded, from which version + Any other DCC devices in use + Specific details of your difficulty including error messages if any, or what you would like to do with JMRI. Decoder Programming, Signals, Automation, etc. Depending on the nature of the problem, you may need to supply even more information, but this is the absolute required for anyone to give you accurate answers. Signing you post helps keep the group friendly and personable! Your moderators and trouble shooters.

Please use "meaningful subject lines" when starting topics. We are getting lots of subject lines that don't give much if any idea of what the topic is about. By providing a meaningful subject line you may get the attention of someone that can provide you assistance with your issue. It also give others the chance to skip the topic if it is not of interest to them. -- Peter Ulvestad JMRI Users Group Moderator - https://www.jmri.org ( http://www.jmri.org ) Tam Valley Group Moderator - https://tamvalleydepot.com/ ( http://tamvalleydepot.com/ ) Sprog-DCC Group Moderator - http://www.sprog-dcc.co.uk/ ( http://www.sprog-dcc.co.uk/ ) Edmonton Model Railroad Association - http://www.emra.club/

We would like to point out that this list is for discussions related to JMRI, and is intended to be a place that people, particularly beginners, can turn to for help with their JMRI problems from more experienced JMRI users. General DCC and model railroading topics should be taken to a more appropriate forum and NOT be posted here. SPAM of any kind, politics, legal issues, and other off-topic matters should NOT be posted to the list and will be subject to deletion by the moderators, as will any responses to such off-topic matters. New members still on moderated status will find that off-topic posts will not be approved for posting, and old members making such posts may find themselves back on moderated status. BUY / SELL and ADVERTISING is NOT PERMITTED Let's keep things simple for all of us, and keep the discussion here on-topic. Your moderators

Wanting to drive a Signal based on a decision 'to set green / red' from a LogicX - already set a sensor 'light' on the screen and switch turnouts,, looking for guidance to then set a dwarf signal. unable to use turnout motor switches as there are two x three-way turnouts used. If there is a write up or Youtube I would appreciate in pointer, all i have seen so far are track sensor based and switched from a single turnout motor. Happy to answer any questions... thanks Randall

I have JMRI LogicX working through a tree/ladder of turnout to set 'a road in a yard' to the 'Main' from a touch sensor on a Panel. Due to space, I am using two x three-way turnouts meaning I cannot use the turnout motor internal switches to switch leds on the Dward Signals on each road. On the screen, I have a 'sensor' light next to the Road when it is clear to the Main. All good so far and works fine. Looking now for an addressable signal controller board to receive a JMRI command to turn a 'dwarf' signal from 'red' to 'green' when the sensor on the panel is selected (when it sets the required road to main). The signal controller will connect to an AUX bus connected to, in this case, a NCE PowerPro Controller. What Signal Controller Boards are you using to take the command to change the LEDs from JMRI? happy to answer any clarifying questions! Thanks Randall

A user has been interested in possibly distributing JMRI as a “FlatPak” for Linux. I don’t know much about that method, but apparently the distribution file also includes the JRE, so it’s (at least in theory) easier to install. As an experiment, you can find a 5.10 distribution in this form at https://github.com/JMRI/JMRI/releases/download/v5.10/jmri.5.10.flatpak For more on this, see JMRI/JMRI Issue 11658: https://github.com/JMRI/JMRI/issues/11658 Is anybody familiar enough with this distribution method to be able to try it? Is this something that we should do on an ongoing basis? Bob — Bob Jacobsen rgj1927@...

Team, I have about 70 control panels and I navigate them using buttons with links. While this works fine, I can see my panel count only growing with time. The thought occurred to me of the possibilty of adding a swipe function to navigate from Panel to Panel from a web view (tablet). For example, if you could assign a Panel to a SWIPE GROUP then swiping right or left would take you to the next panel in the group. Does this sound like it would be useful to others? -- Many thanks in advance! Vinny DeRobertis ~ Apex, NC New York & Hudson Valley RR Windows 7 Pro / Java 11 / JMRI v5.10 Command Station: Digikeijs DR5000. Booster: Digikeijs DR5033 (4) Samsung A7 10.4" Tablets Fully Kiosk/Engine Driver v2.37.187 DCC/DMX Gateway: Pricom LLS. LocoNet Input Modules: Digikeijs DR4088LN DCC Output Modules: Digikeijs DR4018 / Yamorc YD8116. Sensors: Model Train Technology: DETECTOR-HO. Turnout Motors: MTB MP1

I renamed a block via a layout panel and all that happened is it created a new block with the old name, which I can't now find. Using PanelPro->Tools->Where Used to search for the block it says this: Block: UBU5 (IB:AUTO:0023) Listener count: 3 Layout Block references UBU5 (ILB19) The block is called UBU5 so that bit I understand but how can I find the layout block reference? Thanks Chris

All, Recently developed a problem with one of my older diesels, an N scale Bachmann with Econami factory installled. Def used is ECO-100 Diesel. Sound was fine, loco would not move. On the programming track, I loaded the loco's DecoderPro roster entry file and used the CVs tab to compare all values. No differences. Loco still not moving. Did a Reset. Loco now moves. Rewrote all CVs from the loco's roster entry file. Loco now will again not move. To emphasize, these settings have worked fine for years. Are there some settings somewhere that DecoderPro can not see or change, except by reset? Regards

I found all of my text label shown as on letter and dots or all dots. Is there a way to fix this? File uploaded. Stephen Marler

All, Windows 10 JMRI 5.11.3 Noticed while running four of my trains in auto that if I have a derail and I try to stop all the trains some of them slow down to stop, but resume on their own upon reaching next block. In Auto Trains window I press "Stop All Auto Trains". All trains start slowing and show "Resume". Some trains then contiue and show "Stop". Had not noticed this in version 5.8. Roger

Hi, Members 1.1k Edit Posted 1 hour ago One for the more learned amongst us to have a look at. I have the following set up : NCE Powercab, JMRI running on a Raspberry Pi via NCE USB using M Steve Todd's files, Panel Pro with a touchscreen panel to operate turnouts, turnout motors are DCC Supplies Cobalt Digital IP. The touchscreen panel works exactly as intended to control the turnouts. I would like the ability to use my phone to become a second throttle. With Wi-Throttle server running, I connected my phone to the WiFi network created by the Raspberry Pi, opened up the Engine Driver app & connected to the server. And here is where it goes wrong. Typing a loco address and then trying to move something , absolutely no response from the loco. If I try to operate a turnout motor via the accessory address , it works perfectly. The loco isn't stuck in consist mode as it works off the bat from the NCE handset using the same DCC address so as far as I know I'm not using the wrong address. On the Wi Throttle server screen I can see the phone throttle is connected and even the address of the locomotive I'm trying to control. The Track power is on. Can anyone give any pointers here? thanks in advance

I created a nice panel for the museum layout and created train tracking markers on it. It works well except for one show stopping thing. At one spot in the loop there is a detection gap between blocks that kills the tracking. The gap is only 1 or 2 seconds. Is there a workaround for this? Increasing train length is not an option. Installing a new detector is not likely either. George

Version 5.11.4+ R87a9dadc80 (Java 17.0.13) The BDL168 is discontinued and replaced with BDL716 which I have two installed on LocoNet. Upon starting JMRI, if the sensor is high as indicated by the LT5C LED, JMRI shows UNKNOWN then INACTIVE when I QUERY (wrong) if the sensor is low as indicated by the LT5C LED, JMRI shows UNKNOWN then INACTIVE when I QUERY (correct) During use the sensors correctly show inactive and active so changed states work correctly. I don't recall this behavior using version 5.10 but I could be mistaken and I also added a second BDL716 at the same time I upgraded JMRI. The problem is JMRI doesn't "see" the trains sitting in the yard although the LT5C clearly shows high/active so I have to run the train out of the block and back in to initialize the sensor at the correct level. //stevemac

I can easily create turnouts, sensors and blocks but I can't delete them from their Panel Pro tables with jython. The only method I found while browsing the class structure was dispose() and that had no effect. So far I am only using the simple jython classes ( if I have the nomenclature correct) in statements like turnouts.newTurnout(...) . -- -Ralph

Hi, I am running DecoderPro since many years without any Problem. I recently got another Laptop with win11Pro preinstalled - Version 24H2. After installation DecoderPro ask me to get started by checking in with a new Loco placed on the programming track. It comes back with the correct decoder and I store it in the Roster. When I exit and restart DecoderPro I click NEW+ to get a new Loco and decoder recognized, but the field at the bottom left ( Read decoder type) is greyed out. After deinstallation i even deleted all remnants from JMRI and even cleaned the registry as far as I could. I reinstalled - did no new Lokomotive, but tried to import a complete Lokpark/Roster from my second laptop - all 104 locos appeared correctly, but I cannot add a new locomotive/decoder because in the new locomotive Window the button at the bottom left (read decoder Type) is still greyd out. And no - I am not Read only.... I red several JMRI topics, I tried to rebuild the coplete Lokpar/Roster (which did nothing) and so I am stuck. I am working with DR5000/Yamorc YD7001 and Z21, I can work with the Throttle without any Problem, so the connection to my centralStation is ok (over WIFI by the way) I am currently on 5.10.4 Release but tried also the 5.11.4 TestRelease with same result. Can I ask to help me ? Vest regards Erik