开云体育

Thanks for your reply Nick. When I do as you suggest clicking on "File" gives a drop down menu with just two items which are "Store panels" and "Delete this panel". Does that mean I am using the Panel

Hi Ross, This might be kicking in an already open door, but: have you tested that the new computer's USB ports are actually working, say, with an external USB harddisk or some such? In you saga,

Jim, That is the intention of that tool. It only works with decoders implementing CV15,16 locking as per NMRA S9.2.2. But since it was written, many decoder manufacturers have changed/differing

Nick, Marc has already given you a correct explanation. But I suggest you also read this document as it well explains this topic and DCC system addressing differences:

Marc, Are you saying there's a "roster.xml" file within the "roster" folder within "Roster Location"? That shouldn't be the case. The "Roster Location" should always point to a folder containing the

Thanks Dave, for suggesting a work around, although also an addition for a future release: ?being able to check and set all four sensor states from within Logix. ?Jerry

Tom, First go to the LocoNet drop down list and select 'Monitor LocoNet Stats.'? (4th item) It should show three boxes with the firmware revision, breaks, and errors. That tells you that the LocoNet

Ken, The target for a memory to memory copy is a string field which contains the destination memory name. It appears that there is no provision for a named bean handle so the name change is not

Spuds, Sorry that I forgot to mention that my command station is a NCE PH Pro Radio system. ?The JMRI Panel Pro version is 4.15.9 and Java is version 1.8.0-211 But since I am using the LocoBuffer USB

Mike, Various things don't add up here. We need to get to the bottom of this one. 1) We need you to go to the Help->Locations menu item, click in the folders display area, Select All (ctrl-A), Copy

Thanks Marc, I thought it was something unique to NCE. Nick "I'm not a failure. I started at the bottom and I found it easily attainable. Life is too short to set unattainable goals" - Nick Kulp

It's implied from the locobuffer that you're using a digitrax command station. If thats wrong, or things are more complicated, please list that info, and the version of JMRI you're using. The easiest

Changing names, sometimes requires saving and restarting so everything picks up the name change. Many things get the change notice and work right away, but some, view like the name gets passed down a

Marc, I’d expected the same – up and running in a few minutes. Several hours later I’ve experienced ‘no joy:’ Ross Sent: Thursday, August 1, 2019 5:21 PM To: [email protected] Subject: Re:

Frank, Never attempt to guess the model of a modern ESU decoder. You must always use New Loco->Read Type from Decoder. This will uniquely identify any current ESU decoder. Never with an ESU decoder.

Marc, Thank you for checking. This may verify that we are not getting communication between the LocoBuffer and computer. I will re-check all of the cables. I can also run a ‘known-good’ jumper

I installed the drivers from the RR-CirKits web site. Dick Bronson confirmed they were correct from the data in the port properties. Ross Sent: Thursday, August 1, 2019 4:53 PM To: [email protected]

Does?multi decoder control allow you to program multiple decoder locos?? If so how do I use it? Thanks. Jim K

GitHub issue #7272 created.

Nigel, Thank you for the input. The COM ports seem to be correctly established, 1 for each LocoBuffer. This was verified on Device Manager both before and after re-installing the drivers. Dick Bronson