¿ªÔÆÌåÓý

  1. Jmriusers
  2. Messages
Single Messages Topics Expanded Polls

Locked Re: Help getting JMRI working on a new WIN10 computer

 

¿ªÔÆÌåÓý

Marc,

?

Thank you for checking.? This may verify that we are not getting communication between the LocoBuffer and computer.

?

I will re-check all of the cables.? I can also run a ¡®known-good¡¯ jumper from the DCS100 to the computer.? (Computer is remote from the DCS100).

?

Ross

?

From: [email protected] <[email protected]> On Behalf Of forfoum@...
Sent: Thursday, August 1, 2019 5:29 PM
To: [email protected]
Subject: Re: [jmriusers] Help getting JMRI working on a new WIN10 computer

?

On Thu, Aug 1, 2019 at 05:20 PM, Ross Kudlick wrote:

Thank you for the hint.? I will check next time I¡¯m at the club.?

?

Doesn¡¯t explain why it works when the USB cable is unplugged from 1 computer and plugged into the other.

?

Ross

Same result using this French Win10 64 bit HP PC.

Unplug the Loconet cable and the Monitor Loconet Stats opens? to 8 blank boxes. The Locobuffer-USB gets power from both the USB cable and the Loconet cable which might explain the blank boxes. The minute I plug the Loconet cable in, the 8 blank boxes change to? 3, populated, boxes.?

good luck

Marc

Join [email protected] to automatically receive all group messages.