开云体育

Digitrax sells the PR-1 which is a hardware device that connects to a computer. Others write software which will program an engine on a separate, stand alone, track. Good idea that works

Forgive me, but what is PR-1? Jim Hanna El Cajon, CA

No. Jon Miller AT&SF For me time has stopped in 1941 Digitrax DCC owner, Chief system NMRA Life member #2623 Member SFRH&MS

I know this question has prolly been answered before but I can't seem to find it in the archives. Will Decoder Pro work with PR-1 yet and if so are there instructions on how to set it

Claudio: Go to http://jmri.sourceforge.net/DecoderPro and click on "new manual" and it will answer all your questions. Good Luck, Jim Hanna El Cajon, CA

Hi all: I am new user of JMRI. Have a NCE System, lot of Digitrax decoders, some Lenz and few Zimo. 1) Some body tell me step by step how to use the software with NCE system? Need use it on "Use

Yeah... but it won't work very well without a power input, too. <<grin>> Since a picture is worth a thousand words... here's a photo of what it looks like: http://photo

Hummmm! There are some good ideas here, but I am having trouble conceptualizing your configuration. I think you have a box with the locobuffer inside and a piece of track on the outside (top.) The

Jerry- I put mine in a box, too... however, I took a tip from the setup at the club (Orlando N-Trak) and used the same project box as the PR1. There's a piece of track on top, and it's wired to the

Dave: Mark G. has said it in a most comprehensive way that this is indeed an advanced type list and not especially useful to the casual observer or one who intends on staying in the DC operations

Thanks for the troubleshooting advice. I got cute and installed the locobuffer in a Radio Shack plastic project box. And the set up is at the club layout. Tomorrow I will remove the box cover so I

A timeout error generally means that the computer (DecoderPro) is not talking to the unit on the test track. 1) Is LED D1 on ON the LocoBuffer? 2) Is the DCS100 ON? 3) When you open the programmer

Jerry: I'm having the exact same problem, please let me know what you did. I just built my locobufer from a kit and have not gotten it to read a decoder on the test track. Bill

Well, I downloaded the latest JMRI installation files and successfully got Decoder Pro to execute. But I got an error message when attempting to read the decoder CV's. Decoder Pro kept giving an

Dave Nelson wrote:

Bob, MY EBII doesn't offer feedback thus I'm not sure how valuable the following will be; packet: ef e 7c 67 0 40 22 0 0 0 3a 33 33 5d Write Programming Track: Write Byte in OP's Mode (NO

This Yahoo group is set to "new members posts are moderated". This is because Yahoo groups are increasingly getting spammed, usually by people who sign up a spurious account, send obnoxious email,

I'm away from my layout, and just discovered that I'm not sure how to do Digitrax ops-mode writes to a _short_ address. I've just been working with long addresses so far, but need to write the

Hi- This is very similar to what I had proposed about a month ago! See: [Image] http://www3.telus.net/HarrisFamily/index.html at the bottom of the page. David Joe Ellis wrote: