--- In jmriusers@y..., jerry snyder <jerrys@c...> wrote:
Hummmm! There are some good ideas here, but I am having trouble
conceptualizing your configuration.
I think you have a box with the locobuffer inside and a piece of track on
the outside (top.) The PC has a serial cable to the Locobuffer and the
locobuffer has the telephone cable to the loconet. The loconet eventually
goes to the Command station. The command station has two outputs, one for
the running track and one for the programming track. I guess these two
outputs go back to your box the end terminals of a DPDT switch and the
center 'blade' terminals are wired to the track on the top of the box. So
do you have a serial cable, Loconet cable and two pairs of track power
wires going to your box?
I like that.
Yeah... but it won't work very well without a power input, too. <<grin>>
Since a picture is worth a thousand words... here's a photo of what it looks like:
(That's a REALLY long link - if it gets broken, just go to:
It's in the album there.
