开云体育

The introduction to LogixNG is at https://www.jmri.org/help/en/html/tools/logixng/reference/chapter1.shtml Dave Sand

David, Are you selecting Track Segment from the tool bar? When you hold the shift key and click and start dragging with the mouse, the possible destinations are highlighted. When you reach the

Hi Steve, Thanks again for your replies, active train.forcepassnextsafesection() is perfectly doing the job for my issue; Case resolved Best Adrien

If there’s a Windows command line way to do it, you can execute that from a JMRI script: import java command = “someCommandName” argument =

I have seagulls squawking on the computer when a train approaches the seaside. I set the volume on the computer and forget it. When I don't want squawking, I shut it off the playback with a PanelPro

I just have a question: What are your yard block speeds set at? Defined or "Global"? -- Ken NYNH&H, Old Colony Division, Cape Cod Branch (1949-1959) Loconet * JMRI 5.9.5 * OSX,Win10,Ubuntu Blog: Cape

I have tried to join the two red squares on my track plan: Keyshift down, press mouse on one connection point, and drag to the second connection point A track line appears on my plan, but on

Thank you all for your feedback, I was testing the water. Raspberry Pi's used to be very cheap and not really that expensive now considering what it can do but with new alternatives wondered if they

This is a LocoNet-related problem, not a JMRI problem, so it does not _seem_ to me to be addressable by the jmiusers membership. I will take my discussion of the problem "off-list" with

Hi All, I would like view messages exchanged between JMRI and WiFi Throttle. Someone, can suggest me how I can do this, please ? Help guide talk about debug menu but in JMRI 5.6 isn't present (is hide

Dave, How do you do LogixNG initialization ? JeanLouisDelestre@... ----- Mail original ----- De: "Dave Sand" <ds@...> ?: [email protected] Envoyé: Dimanche 20 Octobre

Ken, I checked and : For the sensors I put the option by default as inactive. For the turnouts I run a route and all the turnouts are closed. Thanks for your help.

The loconet has RRCirKIts TC64 MkII, Towermans, Digitrax BDL168's hanging off it. If I leave one loconet branch off (I have 3 branches forming a tee), then the issue does not appear. I have checked

That is an "unknown-to-JMRI" message type, and I have never seen that message on LocoNet. What _other_ LocoNet hardware are you using? Anything that isn't Digitrax or

On JMRI loconet monitor, I can see all my loconet traffic happily displaying and the trunouts and signals all doing what I expect out on the layout. Suddenly no loconet traffic, and an error 'Unable

Yes, turnouts defined in DCC-EX are retrieved to populate the turnout table in JMRI. --SteveT

Jean, After starting up, take a look at the Sensor and Turnout table. If any sensor or turnout is showing Unknown, it will cause the signal logic to display Stop or stay Red. I don't remember if you

Your latest questions are WELL above my pay grade. Sorry.

Phil, Use a xml aware editor and copy the routes element and its content. If you are using Windows, I recommend NotePad++. This is a view using NotePad++ on Windows. After loading the xml file, the

Yes, the system audio volume on windows7. Attached is info I found on using a 3rd party utility that might work. See my follow questions on the attached snip of the original post.