开云体育

Am 30.11.2019 um 01:07 schrieb Phil in gorgeous Young Harris via Groups.Io: You're welcome, Phil. Sorry, I forgot to mention that the files have to be mono. You can use stereo files, but not for the

Randall Thanks for the background - I should have know that this problem was above my pay grade! Based on your suggestion I ran Windows within VirtualBox (the nearest I have to a Windows machine) and

Thanks Marc, I'll check to see if there's a group out there with familiar with what settings I might be able to modify on the DCC++ side. Russ

Dave, he is using DCC++? and it looks more and more like his DCC++ system has issues with reading the current draw and programming on Program Track is functional. Marc? .

Russ, You still haven't grasped the problem. If you have a computer running DecoderPro, it can't magically talk to a loco on your layout to drive and/or program it. You must have some brand/model

Dave, Sorry for the confusion. Through DecoderPro, I run an instance of a throttle launched from within DecoderPro on my Windows 10 PC. When using the programming portion of DecoderPro through the

See LayoutEditor-Explore Alternative Slip Colors (based on adjacent track segments) PR #7682

Ah ok. https://pastebin.com/rC8wkaXd j - Jared F. Nichols bmwftw@... Sent from my iPad Pro

Jared, be aware that this forum strips attachments. You'll need to post it in the files section (or elsewhere on the web) and include a link.

Hi all- I’ve been at this for a bit, so I thought I’d just throw it out there and say that if you’ve got twin-coil type turnout motors (like the Peco PL-10 or PL-11) and you’re trying to

Paul, Do you think this change will make it into the Dec production release? Regards, Allen

Dave, My virus protection is from Spectrum/previously Charter Communications & is labeled F-Secure. This path is what my virus protection has allowed thru as a

Russ, Thanks. Unfortunately that doesn't answer my question. JMRI has to connect to your Tsunami TSU-PNP by means of some DCC system brand and model (e.g. Digitrax Zephyr, NCE Power Pro...). I'm

Dave, JMRI 4.16, using the built-in throttle to a Tsunami TSU-PNP. Thanks, Russ

The CTC tutorial has been uploaded the groups file area. /g/jmriusers/files/CTC_Tutorial.jmri.zip This is a complete profile with panels, demo content, the tutorial PDF file. If the

Russ, What brand and model of DCC system are you using. Some have problems with CVs>256. Dave in Australia

Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the [email protected] group. * /CTC_Tutorial.jmri.zip (

Could this be some kind of timing error? On the CV's tab, I found that all values came up in yellow.? When from the CVs, reading any single value on CV's between 1-256, most of the time the reads

Dennis, The usual cause of this is an antivirus program quarantining "LaunchJMRI.exe" during the install procedure, resulting in an incomplete installation of JMRI. "LaunchJMRI.exe" is the file

Thanks Klaus.? I worked with my audio files (as you thought, the original was 44100, not 47k like I said, and they were stereo which may have been the real problem), added some more notches (I