开云体育

Hi! Running JMRI 4.14 and already tested 4.16, I'm still a bit stuck on how "invert" sensor works. I'm receiving S88N based block occupancy signals: LOW (0V) is block occupied. HIGH (5V) is block

Colin, I've now enabled HTTPS on the site using Let's Encrypt - it should now be browse-able via https://www.jmri.org and https://jmri.org. For the time being, it's still also being served over HTTP

Thanks Dave Sand, that is the problem I'm trying to solve. My panel appears to be set up similarly to yours - are you using feedback? If so I wonder what change you made to make it work better than

Dave, I have created a possible solution to the emulated cross-over using slips issue. While doing this I discovered another issue. A slip is 2 turnouts that can create up to 4 routes. This can be

Kevin, I looked into the RS protocol for a little while last night.? It looks like a serial protocol of sorts so the software would be the hardest part, and I would need an RS sensor device of some

I apologize for not being more clear. I need two ends of a crossover to act together as on the prototype. To match the prototype, those two turnouts controlled with one bit act as a crossover with one

Hi Dave B, If you require the Turnouts to act independently ( as they are doing when using Slips, Routes, LRoutes or Logix?), then do NOT use the supporting Turnouts feature. If the Layout Editor

Jim: My point is that browsers are starting to refuse. Well, strongly warn the users not to proceed at least. The other point is that "saving the fee" is no longer an issue with Let's Encrypt.

Conrad, I found your 645 VSD file, thank you! I compared the file with my 645 VSD file and couldn't see a difference - except the D1.wav/D1k.wav. Yes, I saw and heard the click-clack sound. It can be

Conrad, You're welcome! Sorry for the trouble with the D1.wav file. I should have mentioned that the modified notch file is called D1k.wav. But my 645 VSD file also contains the original file called

Without getting hung up too much on nomenclature: A crossover ( in this context ) is a way to change from one track to another parallel track. The points at the two ends are operated together because

I found it easier to use routes than to use the supporting turnout feature. (All the more reason for slips not having that feature.) ?I have a complicated yard (<

Dave, If I understand Hall.jpg correctly, you have turnouts, slips and level crossings acting as cross-overs. See if my annotated image is correct:

Dave,Thank you!Jack

Dave, Great information. I’ll be making that revision tonight. I sometimes use the hammerhead on my own when making moves between operation sessions so the feedback to the panel will be nice in

I posted some screen shots here, I apologize if the original question was badly communicated. /g/jmriusers/album?id=94923

Bob, I have submitted a fix which will create a new panel when the different type of cross-over is selected. It is PR #7387. Dave Sand

Klaus, Upload worked on second computer.? Of course it is on my 645 dropbox file. not the latest, no notes and maybe a funny thing with click-clack.? It does have the 5 notches though. Finally,

Klaus, I downloaded your 645 file and it played perfectly.? Thank you.? However, when i installed the D1 wav file into my 645 program i got nowhere.? Even after i corrected several of my typo error

Jack, That (unable to write LaunchJMRI.exe) is a sure sign that your antivirus software is preventing you from installing that JMRI version. It often happens with antivirus software that blocks new or