开云体育

Thanks to everyone that helped resolve my issue. A special thanks to Ken Cameron. He said my issue was a little unusual and called me and fixed the issue. It was definitely above my pay grade. Happy

Thanks for the answer, Dave.? I appreciate your time.

To all I would agree with all the comments. An amazing program along with great support from the team and all users. Using this program has provided hours of enjoyment in operating my model railway.

I upgraded to version 4.14 and still seeing the errors trying to write to the CV400+ variables

When is the decoder specs going to be available for the Bachmann 2-8-0 Sound Value decoder by Soundtraxx? Thank you, Max Robbins

Like Joel, done, thanks for the reminder Greg and I echo his comments of appreciation to the JMRI developers and contributors to this group discussion. JMRI is an amazing program and this group is an

Thanks, I will do that! I did not know there was a newer version

I saw that Marc, and looking at the definition in JMRI nothing shows above about 253. It would be a good idea to update to 4.14 -- Peter Ulvestad JMRI Users Group Moderator - http://www.jmri.org

Tim, Beside the diesel notch loops there are also loops for horn or whistles sounds in existing VSD files, and they are working fine. So, it's doable. Maybe the experts Jim and Andrew could give an

This is what JMRI selected -? Zimo Unified Software (Version 25+) MX621N version 31 2018-12-24 06:46:18,041 util.Log4JUtil? ? ? ? ? ? ? ? ? ? ? ? INFO? - * JMRI log **

None of the definitions I see go above CV253. Which definition are you using? If you open the system console are there any errors showing when writing the decoder? You can copy and paste here. --

Klaus,? I am pretty confident that my loops are working.? You are correct that it is not just the zero crossing that is important.? I analyzed the whole wave form and created my loops by matching

Hello, I have installed Zimo MX621 deoders in many of my locomotives. But I am seeing errors writing to the decoders. The Zimo MX621 has no CV Values in the 400's yet the decoder profile seems to

Paul, I have not seen that anyone has addressed the size of the Pi for you. That is another great piece of information. If you get it with a plastic protective case, it is approximately 4 inches by 3

Bob, If the config is wrong, the wrong init is sent, that would also account for the poll not working since the node doesn't initialize. If that's right, we don't have a hardware issue as much as

That Init message indicates your JMRI preferences are _NOT_ set correctly. The type will be N if a SUSIC is configured. But the first thing to do is to fix whatever has gone wrong with the node.

Ken, I just got it working this morning. ?I removed all the connections except for the one NCE network connection I am using. ?The way it ended up working was to do a complete uninstall, remove the

Paul: David is correct... A command station is that and will not be replaced by a computer running JMRI. I have left two of the (Steve's) RPi-JMRI boxes at friends for their (1) Digitrax RR and (2)

The SUSIC was working and if all up stream from it to the computer remained unchanged you should get the 1 to 1 blink...? I say that not sure if it initializes without it's cards set right... Let's

Bob, Thanks. I should have checked Steve's website earlier. I have not had a chance to read it in detail but it looks like it will do what I am asking. Paul D