开云体育

I have done it so: Created signal headsby adding Double output, green red output. system name SH504. egample? green output use existing NT504 red output ? ? ?use existing. ? ? ?NT504 Create?

Hi. I have reconfigured my Layout and made it as simple as possible. At each DCC controlled point I have placed an LED to show if the point is thrown or closed. The?concern is that?when I switch on

Dave, I have just raised an issue to ask if a "DISCONNECT" option can be added to LE/PE to permit a 'Split into two" in a Block/Track Segment to be made a complete Break. If splitting the track

Bob: Reading through all this and looking at the downloads page again, I agree with tooons, the original poster when he says To clarify that the download files are for either new installs or updates,

Dave, That is a possibility when I first started out. I developed into the idea of splitting the edge blocks into a smaller edge blocks to make the physical break in the line in preparation for the EC

There is no difference between these. An install is an install, whether or not a previous version was installed. Bob -- Bob Jacobsen rgj1927@...

There is no install script (or specific installation location) under Linux or macOS. Allowing even an experienced user to pick and choose what to install/update/remove would almost certainly lead to a

Hi: at the end of a long process I've got DecoderPro running on a Raspberry Pi3B in a "PiDesktop" talking to an NCE PowerCab via USB. I'm using DecoderPro 4.10 + R418243e.??? The OS is Raspian (I

Can the install script tell if the previous version has been installed? i.e. does it add anything to the Windows registry or have a specific install location under Linux or MacOS? If so then let the

The JMRI Consisting Tool is not fully compatible with the Power Cab. Set up your consists on your Power Cab according to the NCE consisting rules (see below). Then use a JMRI Throttle to select the

Dave, I have been doing some more testing and I was able to re-create the red edge connectors. I created a track segment between two anchor points. I then split the track twice which results in 3

That’s what that language actually says: “If you've previously installed a working version of the program, you only need to download and install one of the files listed here.” Perhaps there’s

I think I now understand better why you have trouble with the logic of the download page instructions. Thanks again for the suggestions. As to speed: Yes, there are hardware limits to how fast CVs can

Address 127? Try address 70. (Anything under 100) Odd and strange things with consist or short address between 100 and 127. Thomas DeSoto, TX

Dave, It may not require 4.13.7, that is what I used for testing. BTW: 4.14 will be available soon. Dave Sand

Dave, Thanks for the new data. I will need to upgrade to 4.13.7 before I do anything more. I’ll follow your suggestions and see how we get on. Dave Sent from my iPhone - Dave

Sorry slip of the fingers!? Indeed '\n'.? I was trying to align things by inserting '\n' before some times to make it appear either at the top or the bottom of a box which can contain 2 lines under

I am running JMRI on an HP laptop connected to my PowerCab and SB5 via an NCE USB adapter. I have set up all of my locomotives and can run them individually with no problems using the throttle in

Iain, The /n is actually \n (back slash). The Constructors section of the Javadoc shows how to create an item. The set methods are used to modify an item. The items have to be created in the proper

Dave, I am able to make several connections between Newton Abbot East and Newton Abbot West using JMRI 4.13.7. The requirement is that the edge connectors on both sides need to be yellow. Red ones do