开云体育

Bob, thats a great point about Multisensors generally being used with levers, and needing to be defined as getting clicked left/right or up/down. In my case, the multisensors will be disabled, as the

I agree, lots of other things in that commit. I would say the change from looking for LOCO_IN_USE to != LOCO_FREE would come closest to the older results. My other thought was if anything had a

I suspect from reading the github pages that the original intention was to offer more checkboxes to choose which things to display. So, my ideal solution would be to have checkboxes for all of the

Just a cursory look but it appears removing the right side of the && at line 182 would fix it.

That particular PR includes a lot of good stuff besides this change to the filter logic. The filter part seems to boil down to a line that says (effectively) “if no checkboxes are selected, display

I think this should be reverted before the release of 4.15. If I could convince myself to participate in the development of this product I would do it but I've been retired for just 1 year and need to

Michael: Okay the PR3 should have enough power to program the decoder. But I've seen some BLI P3's not like the programming track, in my case on an NCE PowerCab. Need for power... the decoder

If somebody wants to look into restoring the previous behavior, the commit that changed this was You can see the full set of changes here:

I will add my vote to Dale and Ken. I do not like the change at all. I use a DCS100, so all 120 slots are 'real', but very annoying that I have to select "show all slots" to see what is there. In

Steven, I am not a developer, but the multi sensor icon was designed to be activated by clicking it either up-down or right-left. As such, I don't believe it is possible to rotate them, say 45

The Silk City Model Railroad Club in Manchester, CT also uses DecoderPro attached to PR3 with 18VDC supply as a dedicated programmer. When we switched to an 18V supply, we no longer needed a

Michael, True, you can't change a decoder type. Here is where the use of the 'username' comes to play. IF you have user names on the existing signal entries and then had those used instead of

Jon, It's the first reply in the thread that Mario started on NCE-DCC: /g/NCE-DCC/topic/28353556 /g/NCE-DCC/message/110515 -- Dave in Australia

Michael, That's a question for the PanelPro experts (I'm not one). As you can see, it's not a simple Edit operation. -- Dave in Australia

Building a new panel in CPE, using the latest version of JMRI. I'm drawing my own graphics to link with multisensor icons and placing them on the control panel editor window to create my dispatcher

Hey guys, Paul, Thanks! I will look into using direction sensors, but at this stage I do like running trains manually when not using auto trains. Steve, That's odd! I'll have a look through my logix

Dave, thanks for all your help. I have almost finished putting signals on my panel and getting them to work correctly. As of right now only 1 is a light it decoder. I do have the rest of the decoders

Rummy, You can flip between CPE and PE modes. LE is completely different. CPE - Control Panel Editor [icons] PE - Panel Editor (the original) [icons] LE - Layout Editor (graphic representation of the

/On 11/27/2018 5:35 PM, Dave Hastings via Groups.Io wrote:// / ??? I assuming you are saying the other 4 MTH engine programmed without a problem (on the main).? On one of the other lists someone

I had similar problems with the BLI N-Scale M1a/b when it came out a few years ago.? I was using a Digitrax PR3 and could not program nor get a clean "Read All Sheets".? I switched from a 14VDC wall