开云体育

Hi Steve I haven't come across the video so will check it out. It's most likely that it is the Signal Mast Logic table that I haven't understood regarding feathers Thanks Torben

Hi Torben, If any of the conditional sensors to the logix are unknown, then it won't be able to calculate so worth checking the appearance in the Signal Mast Logic table, then in sensor table for any

David, Thank you very much.? What you suggest is achievable, but not using SP1a as it is used in many places and may be set in many instances (it is a part of a station platform - so a lot of

Matt: There is a difference in the two... Kernel on the early MCII is the same as you show. However the second is different with a #154 not #105. Build also has a difference 20160517 not 20150526.

Iain, After further review, it appears that things are working exactly as expected. As I mentioned before, each Action is performed in sequence with delayed Actions queued. From a Logix processing

Thanks - code in and working - I'll do some testing over the weekend and let you know how it has gone. It's a steep learning curve for me at the moment soI really appreciate all your help.

David,? Sorry the two early signals are 36 and 38!? Don't think that matters really but it does now tie up with the NCE output! Iain

David, Thank you.? Browse as requested - another thing I didn't know about!? Comments in square brackets - this is the same as the NCE Command Monitor output I put in the last message.

Iain, The Select menu for a Logix contains a Browse option under the Edit option. This will display the Logix in a separate window. The text in the window can be selected and copied. If you post the

Well, as we're " spot the 'givens and druthers' of the ideas" .... Car inventory can have a picture on it like the "media loco roster" for Decoder-pro ? Adding columns can be great so one can add

Thanks Ken Sticking to the numbering of my points 2. I've tried Start of Day to the relevant board, with both 'No Action' or 'Saved Position' - with no success - still the red X on switch on 3. Re the

Dave, Thank ycallinou very much for persevering with me.? Where I am at is as follows - I cannot find how to print out a Logix as you have so you will have to take my words for this.? The times are

Jim, Based on your use of the sensor Property, I concluded that you were avoiding setting up a structure to keep track of the application specific listeners. There is an alternate form for adding a

Thanks Steve, is there any particular program I can use on Windows to edit the file? I seem to remember notepad gives a very weird format. I will take out all the stop sensors from the sections and

Iain, Sounds like you have something else happening. Here is a simple Logix with the delay settings: IX:AUTO:0001C1 Delay Turnout Test [x] R1 IF Sensor "Reset" state is "Sensor Active" THEN On Change

Good Morning All Are there any planned meetings for JMRI users this weekend in Milwaukee at trainfest? Paul V

Torben, A couple of points. 1. If you get a red X or non-icon on the panel, that means the sensor or turnout has not been set. Meaning it is UNKNOWN, so no icon. So it seems that you would need to

When I open PanelPro with a different profile, everything is fine. So it's something in that profile -- that's easy enough to fix. So it was a false alarm after all. Thanks all. Scott Walton

Jim and Roland, Could you verify the Kernel version and Build number of your devices to see if there's something different there? You can find these out via the standard Android Settings 'app' and

Hi Steve This thread has been v. useful in getting my N gauge BR2003 feather signal working - I too am using CBUS and turnout commands.? Having to use a 2nd turnout command to switch to Zero aspect