开云体育

Hi Dan I have several folders under JMRI that have my layout in them. I am trying to clean up the folders that contain my layouts by getting rid of some of the layouts that are old and not used any

The xml file and the picture are uploaded now. /Benny Den l?r 1 sep. 2018 kl 18:13 skrev Dave Sand <ds@...>:

PJ, The "console window" is at Help >> System Console. I looked at your latest debug upload. Bob has already mentioned some of the errors. It appears that you have an internal turnout with the

Dave, Your a Genius, I think you nailed it in your reply, thank you, thank you, thank you. As I read through your thoughtful and educational reply I can only appreciate you taking the time to sort

Benny, Attachments are removed from postings. You will need to upload your picture to the photos section. It would also be helpful if you could upload the panel xml file to the

Allen, I have identified the problem. The section containing NT14 was missing the entry point for the stub track. I devised a quick fix for that and then several other turnouts had the same

I have 5 nodes working on this system, but I used the Arduino Nano.? I only have two wire running between nodes for communication (i used doorbell wire from Ace Hardware).? It's been awhile since I

Hi, I have downloaded the RPi-JMRI image and installed on a new SD card. No problem to get it working. Downloaded my layout made in 4.12. It started up and have connection to my railroad. Raspberry Pi

Note that the RS485 uses _three_ pins on the Arduino: Send, receive and transmit control. Without the 3rd one connected and properly acting, you won’t have communications on the line. Bob -- Bob

What C/MRI nodes do you have on your railroad? The error messages (appended below) are of three types: 1) A turnout CT1904. Do you have a node “1” defined? Does it really have _904_ output

Dave: ? I put the "C" in the CMRI preferences.?This cured 90% of the problems. But I am still getting load problems. I sent a debugging info a second time with the newest problems. What I get is

Bob: ? What Dave Sand told me to do solved most of the problems but I am sill getting Error Messages. I have send a new Debug Info. PJ

Hi Gordon, The first hurdle you'll have with your old laptop is getting Java 8 (also known as 1.8) to install. JMRI absolutely needs that in its most recent version (4.12 is nice and stable). It can

I surrender,? a few years ago I had JMRI on my Windows 7 computer with my PR3 and Digitrax DCS 100 and all worked great .Now fast forward to today I am again setting things up and I cant get anything

Hi, I have had the software installed for several years, but I never was able to make it work. I had trouble identifying the USB port on my computer for the DB150 interface. My grandson tried to

Thanks Dave Now please someone else have a look. Can’t get to first base with this. I suspect it is something in the parameters or preferences or I have the wrong download

Jerry: The Arduini group (still on Y!) has the C/MRI interface described for a project and the MRCS site has product. I've adapted the C/MRI I/O and their code to a number of Arduino boards though

Allan, Thanks for this. The JMRI console log was exactly what we wanted to see. However, I'll bow out of this now because PR3 and LocoNet are not my areas of expertise. There are many others on this

I have built a physical panel with buttons and leds, using a CML Electronics DMT30 board. I want to use it in Slave mode, where it sends sensor messages in response to button presses, and I have

Hi Jay, I'd look at the motor wiring. You said 'it does not run either', which is a major clue. The other one being that you mention the lights flashing but not the motor being activated in a short