开云体育

Just a few comments If you have 3. 4x8 board layout and only 4 blocks your not going to have many trains running. Your blocks should be train length. On my 8x8 layout i have over 40 blocks. I use

I have my layout built physically and in Layout Editor. I have 4 blocks separated in the layout. I am running a Digitrax Loconet system through RR-Cirkits. I am? using Microsoft Vista on my remote

Excuse me Paul, I have package 2655 (at http://jmri.tagadab.com/jenkins/job/Development/job/Builds/ I see the lastest build is 26

Ken, I'm not aware of any recent changes to the Conductor code.

Just looking at this again, 2696 is the latest build available at http://jmri.tagadab.com/jenkins/job/Development/job/Builds/ You may need to refresh the page to see it. 2655 definitely does not

Richard, Once you get the throttle built and framed, if you go to the "File" tab on the throttle itself, you can save your creation as the default throttle. I think that you may have to bring the

No problem, I will take a look at that again.

Sorry Paul, I tested last build/package available #2655, and now single CV programmer is ok for me, but I have error 306 again if I write a CV in a panel of a decoder definition. Please don't hate me

I'd be very doubtful about trying to adapt a large complex set of software, with lots of semi-autonomous actions, designed to operate one complex system definition,?? to a quite differently purposed

Steve, Does the Conductor screen now allow the options to edit what is there? This exists on the computer end to say a car wasn't there for pickup, or a car was found that didn't show. To advance to

Hi Mike, You can access the Locations window by selecting "Enable frames" in the Web Preferences. This (mostly) works. However, it sounds like you also want a web view of the YardMaster window as

Time to talk to at least one of the kids who might possibly understand the true value. My wife’s comments prompted me to inventory the 'Empire’. I see I should add the books. Rich Sent from

It looks like you can select the first loco, then select Duplicate Loco from the Edit drop-down list. Seems like that should do what you want.

Is it possible to open the Operations Locations window remotely so that the Yardmaster lists could be viewed from a remote device? The only Ops window I found available for remote viewing (not

Hello.? I've successfully connected to JMRI from my Android Tablet via Google Chrome.? JMRI is running on my Windows 7 PC.? From the remote screen, the only thing I see listed under the Operations

Moreno, Build 2696 or later should have all this fix. The problem was an incomplete interpretation of the LocoNet message received. Paul

Right click the roster entry, duplicate. Mick ________________________________ Mick Moignard m: +44 7774 652504 Skype: mickmoignard Sent from my iPad, so please excuse the typos.

Benny, I have created a fix for the color change during route setting problem. It sounds like your panel configuration is a good test case for debugging route selection. Dave Sand

I have done that several times. I have 2 turnouts half way to target sensor jmri always selects instead of the 2 closest to source sensor leaving the train half on track 1 and half on track 2. I put

It is an addiction. I don't care what people think or say. It is an addiction! [email protected]> wrote: -- John Griffin __________________________________ I've lost my dog and my