开云体育

Dave I would Install a new copy of JMRi and then add you old User files of JMRI to the places they are on the new install. Walt

Wmctrl also works on Wayland as well as X.Steve G.

wmctrl -l? is an X-Windows command.? On Sun, 11 Mar 2018 at 10:50, 'Dave Price [dap]' dap@... [jmriusers]<jmriusers@...> wrote: Dear Steve G, Thanks.? ? I'm running on Linux

yes, 4.10 R419243e

Dear Jack, Thanks for this. This gives me something else to check tomorrow morning. Dave Price, Aberystwyth University ________________________________________ Sent: 11 March 2018 18:23 To:

Hopefully JMRI V4.10 -- Dave in Australia The New England Convention 2018 http://www.newenglandmodelrailwayclub.com/content/convention.shtml

JMRI (or its version) have nothing to do with the PTB100 and its presence or absence. If your decoders programmed fine with it in place, I wouldn't worry. It's extremely unlikely to do any damage. I'm

in case this helps, output from lsusb: Bus 004 Device 002: ID 0403:c7d0 Future Technology Devices International, Ltd RR-CirKits LocoBuffer-USB Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB

Dave (and Spuds), I have added virtual masts ;wrong way' and set up the logic by hand for the turnouts and blocks approaching that mast - which works to the required spec. I have used three aspect

PS: never had these problems in Linux Mint, so I was wondering if there is something different with Linux Korora.

JMRI 4.1 java v 1.8.0_151 That was a really good guess though, indeed the all but one of the options were set to internal so I changed them to loconet. Now the power button in JMRI shows "unknown" and

I had a similar experience last week migrating JMRI to a new(er) laptop. I installed Mint 18.3 and following instructions on the JMRI web site, installed Oracle java 8. The initial execution of

Spuds, The challenge that John had was that the only generated signal mast logic was for the proper main with the turnout closed. If the turnout was set to cross over to the wrong main, the signal

What version of JMRI? What version of Java? With so little information it's just guessing. Assuming 4.10, go to your preferences and select Defaults from the menu on the left. Make sure all the check

I'm trying out Linux Korora (Fedora based). For months I was using Linux Mint (Ubuntu) until I broke something and well.... anyway... decided to try something new. Now for Korora, while I got JMRI

My assumption was that there would be a switch that's only used for reverse running. If that switch is thrown, then you're in reverse running mode, and signal accordingly. It could be done with

Dear Steve G, Thanks. I'm running on Linux though not MS Windows so mine is a different environment. Dave Price, Aberystwyth ________________________________________ Sent: 11 March 2018 01:26:09 To:

Probably a bit of a newbie question ... How does JMRI expect to talk to a BOD that supports RailCom ?? I don't have a particular BOD in mind - thinking about making my own and wondering about how it

Steve, Thanks for confirming that the problem is not with me! I will look forward to the fix. Regards Brian W

Well, I just found out that it's not necessary to use the PTB100 with the newer Soundtraxx Tsunami 2's and Econami decoders. So, can anyone tell me if there are concerns using the PTB100 when